Filled Core Cables Outside Voice & Data Filled Foam Skin CACSP Cable Spec. 2007 RUS (REA) PE-89 CACSP Core Construction: Conductors: • Solid, annealed copper; sizes 22 and 24 AWG Insulation: Nominal Cable Data CATALOG NUMBER PAIRS AWG O.D. INCHES WEIGHT LBS/MFT STANDARD LENGTH (FT) 7526551 7526569 7526577 7526585 7526593 7526601 7071574 7526619 7526627 7526635 7526643 7526650 7071608 7526668 7526684 7526692 7526700 7526718 7526726 7526734 7526742 7526759 7526767 7526775 7071616 7071624 7071632 6/22 12/22 25/22 50/22 75/22 100/22 150/22 200/22 300/22 400/22 600/22 900/22 6/24 12/24 25/24 50/24 75/24 100/24 150/24 200/24 300/24 400/24 600/24 900/24 1200/24 1500/24 1800/24 0.47 0.54 0.65 0.83 0.97 1.1 1.3 1.4 1.7 2.0 2.4 2.9 0.40 0.46 0.60 0.72 0.81 0.90 1.1 1.2 1.4 1.6 1.9 2.3 2.6 2.9 3.2 125 180 280 465 635 790 1140 1430 2050 2695 4070 5930 90 125 210 330 430 550 750 980 1370 1800 2590 3790 4920 6110 7280 5000 5000 5000 5000 5000 2500 2500 2500 1250 1250 1250 1000 5000 5000 5000 5000 5000 5000 5000 2500 2500 2500 1250 1250 1000 1000 1000 Data subject to change without notice. Contact your Customer Service Representative for latest information. • Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin, color coded in accordance with telephone industry standards Twisted Pairs: • Insulated conductors are twisted into pairs with varying lay lengths to minimize crosstalk Core Assembly: • 25 pairs and less: pairs are assembled together in a single group • More than 25 pairs: pairs are arranged in groups, each group having a color coded unit binder Filling Compound: • The entire core assembly is completely filled with ETPR compound, filling the interstices between the pairs and under the core tape Core Wrap: • Non-hygroscopic dielectric tape applied longitudinally with an overlap CACSP Sheath: Aluminum Shield: • Corrugated, copolymer coated, 0.008" aluminum tape applied longitudinally over the core wrap Steel Shield: • Corrugated, copolymer coated, 0.006" steel tape applied longitudinally over the aluminum tape with an overlap • The sheath interfaces are flooded with an adhesive water blocking compound Jacket: • Black, linear low density polyethylene Application(s): • Intended for duct and direct buried installations where protection against water and moisture entry is required • The addition of the steel tape armor provides increased mechanical protection and gopher resistance Compliance: • Rural Utilities Service (RUS) 7 CFR 1755.890 (REA PE-89) Packaging: • Standard lengths are shipped on non-returnable wood reels • Non-standard packaging is available upon request 17