Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ·Customer: Technical Data Sheet PN: PLCC6XRGBCT Contents 1.Features 2.Applications 3.Package dimensions 4.Absolute maximum rating 5.Electrical optical characteristics 6.BIN range 7.Soldering pad dimensions 8.Soldering conditions 9.Package tape specifications 10.Typical electro-optical characteristics curves 11.Reliability 12.Cautions 13.Notes Customer confirm Prepared date：Feb. 2011 Approved by Checked by www.ledz.com Issued by Rev.：2 Page 1 of 9 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Part No. PLCC6XRGBCT Emitted Color RGB Face Color Black Chip Material AlGaInP/InGaN Package PPA ◆ Features: Compatible with automatic placement equipment Compatible with reflow solder process Low power consumption and wide viewing angle This product doesn’t contain restriction Substance, comply ROHS standard. ◆ Applications: Automotive and Telecommunication Flat backlight for LCD ,switch and symbol in telephone and fax General use for indicators Indoor displays ◆ Package Dimensions: D4 4 3 5 2 6 1 4- B cathode anode +2 5cathode G 6- R cathode 5.4 3.4 +3 anode +1 anode 0.9 2.3 4.1 2.8 5 5.4 5 Unit:mm Tolerance:±0.2mm Electrodes: Ag Plating Encapsulating Resin: Epoxy. Prepared date：Feb. 2011 www.ledz.com Rev.：2 Page 2 of 9 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ◆ Absolute Maximum Rating （Ta=25℃） Parameter Symbol Power Dissipation PM Max. Unit R 69 Mw G 105 Mw B 105 Mw Pulse Forward Current IFP 100 mA DC Forward Current IF 30 mA Reverse Voltage VR 5 V Topr -30℃～85℃ ℃ -40℃～100℃ ℃ Operating Temperature Range Storage Temperature Range Tstg * IFP condition: pulse width ≤1ms ,duty cycle ≤1/10 ◆ Electrical Optical Characteristics（Ta=25℃） Parameter Luminous Intensity Forward Voltage Dominate Wavelength Test Symbol Min Typ. Max. Unit R 600 -- 900 mcd IF =20mA G 1200 -- 1585 mcd IF =20mA B 240 -- 320 mcd IF =20mA R 1.8 -- 2.3 V IF =20mA G 2.9 -- 3.5 V IF =20mA B 2.9 -- 3.5 V IF =20mA R 618 -- 628 nm IF =20mA G 520 -- 530 nm IF =20mA B 465 -- 475 nm IF =20mA IV VF λD Condition Reverse Current IR -- -- 10 uA VR=5V Viewing Angle 2θ1/2 -- 120 -- Deg. IF =20mA Notes: 1.Tolerance of Luminous Intensity±10%. 2. Tolerance of Forward Voltage±0.05V. 3. Tolerance of Dominate Wavelength±0.1nm. 4.Optical characteristic is measured by HB’s equipment. Prepared date：Feb. 2011 www.ledz.com Rev.：2 Page 3 of 9 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ◆ Soldering Pad Dimensions: Unit:mm Tolerance:±0.2mm ◆ Soldering Conditions (Maximum allowable soldering conditions) • • • • Reflow soldering should not be done more than two times. Do not stress its resin while soldering. After soldering, do not warp the circuit board. Pay attention to electrostatic（ESD）. Prepared date：Feb. 2011 www.ledz.com Rev.：2 Page 4 of 9 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ◆ Package Tape Specifications: (600±1 pcs/Reel) P0 P2 T B0 W F E D0 K0 D1 P1 30～ 5～ ma x A0 Unit:mn symbol spec symbol spec A0 B0 5.41± 0.10 5.78± 0.10 E F 1.75± 0.10 5.50± 0.05 K0 P0 3.10± 0.10 4.00± 0.10 D0 D1 1.55± 0.05 1.5MIN P1 P2 8.00± 0.10 2.00± 0.05 W T 0.25± 0.05 10P0 12.0± 0.30 40.0± 0.20 13 12.5 15.0 178 485mm 270m 500m 245m 160mm 290m 12 Reels in one Box Prepared date：Feb. 2011 6 Boxes in one Carton www.ledz.com Rev.：2 Page 5 of 9 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ◆ Typical Electro-Optical Characteristics Curves： If(mA) Iv 100.0 5.0 80.0 4.0 RED Blue Red 60.0 3.0 Blue Green 40.0 2.0 20.0 1.0 Green 0 Vf(V) 3.5 3.0 2.0 1.8 4.0 If(mA) 0.0 4.5 0 Fig.1 Forward Current vs. Forward Voltage 20 40 80 60 100 Fig.2 Relative Luminous Intensity vs. Forward Current Iv 1.0 RED 2.0 0.8 Blue 1.0 Blue Green 0.6 Red Green 0.5 0.4 0.2 0.2 Ta( ℃) 0.1 -30 -20 -10 0 10 30 20 40 50 60 WL(nm) 0.0 70 400 450 500 550 600 650 Fig.4 Relative Luminous Intensity vs. Wavelength Fig.5 Relative Luminous Intensity vs. Ambient Temperature If(mA) 60 0° 100% 10° 20° 50 30° 40° 40 50° RED 30 60° 50% Green/Blue 20 70° 80° 10 Ta( ℃) 0 0 20 40 60 80 100 90° 0% 90° 30° 0% 50% 100% Relative Luminous Intensity vs.Radiation Angle Fig.6 Maximum Forward Current vs.Ambient Temperature Prepared date：Feb. 2011 60° www.ledz.com Rev.：2 Page 6 of 9 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Reliability (1)Test Items and Conditions Test Item Standard Test Conditions Test Method A.TA=230±5℃ Reflow Soldering Damaged TIME=30-60S B.TA=240±5℃ TIME=110-120S JEITA ED-4701 300 301 Number of Note C.TA=260±5℃ TIME=10±1S 1 time 0/50 D.TA=230±5℃ TIME=30-60S High Temperature Storage JEITA ED-4701 200 201 TA=100±5℃ 1000 Hrs 0/50 Low Temperature Storage JEITA ED-4701 200 202 TA=-40±5℃ 1000 Hrs 0/50 Temperature Humidity Storage JEITA ED-4701 100 103 TA=85±5℃，RH=90%RH 1000 Hrs 0/50 Thermal Shock Test JEITA ED-4701 300 307 -40℃ 15min 100 Cycles 0/50 Temperature Cycling Test JEITA ED-4701 100 105 -40℃ ~ 25℃ 100 Cycles 0/50 1000 Hrs 0/50 Operating Life Test ~ 100℃ 15 Second 15 min 30min 15min MIL-STD-750:1026 MIL-STD-883:1005 TA=25℃ JIS C 7021 :B-1 ~100℃ ~25℃ 30min 15min IF=20mA (2)Criteria of judging the damage Item Symbol Test Conditions Forward Voltage VF Luminous Intensity Criteria for Judgment Min. Max. IF =20 mA --- Initial Data ×1.1 IV IF =20 mA Initial Data × 0.8 --- Reverse Current IR VR = 5V --- ≦50μA Wave length λD/λP IF=Test Current / Initial Data±2nm Appearance / View check Prepared date：Feb. 2011 www.ledz.com No mechanical damage Rev.：2 Page 7 of 9 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ◆ Cautions 1、Package When moisture is absorbed into the package it may vaporize and expand during soldering. There is a possibility that this can cause exfoliation of the contacts and damage to the optical characteristics of the LEDs. So the moisture proof package is used to keep moisture to a minimum in the package. 2、Storage Before opening the package: The LEDs should be kept at 5~30°C and 60%RH or less. The LEDs should be used within a year. After opening the package: The LED must be used within 24 hours, else should be kept at 5~30℃ and 30% RH or less. The LEDs should be used within 7days after opening the package. If unused LEDs remain, they should be stored in moisture proof packages, recommended to return the LEDs to the original moisture proof bag and to reseal the moisture proof bag again. If the LEDs have exceeded the storage time, baking treatment should be performed more than 24 hours at 60 ± 5°C. 3、Soldering Iron Each terminal is to the tip of soldering iron temperature less than 300℃ for 3 seconds within once in less than the soldering iron capacity 25 W.Leave two seconds and more internals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 4、Repairing Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 5、The LED electrode sections are comprised of a gold plated. The gold surface may be affected by environments which contain corrosive gases and so on. Please avoid conditions which may cause the LED to corrode or discolor. This corrosion or discoloration may cause difficulty during soldering operations. It is recommended that the User use the LEDs as soon as possible. 6、Please avoid rapid transitions in ambient temperature, especially in high humidity environments where condensation can occur. Prepared date：Feb. 2011 www.ledz.com Rev.：2 Page 8 of 9 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED 7、Static Electricity 7.1、These products are sensitive to static electricity charge, and users are required to handle with care. Particularly, if an current and or voltage which exceeds the Absolute Maximum Rating of Products is applied, the overflow in energy may cause damage to, or possibly result in electrical destruction of, the Products. The customer is requested to take adequate countermeasures against static electricity charge and surge when handling Products. 7.2、Proper grounding of Products , use of conductive mat, conductive working uniform and shoes, and conductive containers are effective against static electricity and surge. 7.3、Ground low-resistance areas where the product contacts, such as metal surfaces of the work platform, with a conductive mat (surface resistance 106-108 Ω ). 7.4、A tip of soldering iron is requested to be grounded. An ionizer should also be installed where risk of static generation is high. ◆ Notes: 1、Above specification may be changed without notice. We will reserve authority on material change for above specification. 2、When using this product, please observe the absolute maximum ratings and the instructions for the specification sheets. We assume no responsibility for any damage resulting from use of the product which does not comply with the instructions included in the specification sheets. Prepared date：Feb. 2011 www.ledz.com Rev.：2 Page 9 of 9