Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ·Customer: Technical Data Sheet PN: PLCC3014-W6 For: IF=30mA Contents 1.Features 2.Applications 3.Package dimensions 4.Absolute maximum rating 5.Electrical optical characteristics 6.BIN range 7.Package label 8.Soldering pad dimensions 9.Soldering conditions 10.Typical electro-optical characteristics curves 11.Reliability 12.Cautions 13.Notes Customer confirm Prepared date：Aug. 2011 Approved by www.ledz.com Checked by Issued by Rev.：0 Page 1 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Part No. PLCC3014-W6 Emitted Color Dominant White Face Color White Chip Material InGaN/GaN Package PPA ◆ Features: Compatible with automatic placement equipment Compatible with reflow solder process Low power consumption and wide viewing angle This product doesn’t contain restriction Substance, comply ROHS standard. ◆ Applications: Automotive and Telecommunication Flat backlight for LCD ,switch and symbol in telephone and fax General use for indicators Indoor lighting ◆ Package Dimensions: Unit:mm Tolerance:±0.2mm Electrodes: Ag Plating Encapsulating Resin: Silicone with phosphor Prepared date：Aug. 2011 www.ledz.com Rev.：0 Page 2 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ◆ Absolute Maximum Rating （Ta=25℃） Parameter Symbol Max. Unit Power Dissipation PM 180 Mw Pulse Forward Current IFP 100 mA DC Forward Current IF 50 mA Reverse Voltage VR 5 V Topr -30℃～85℃ ℃ -40℃～100℃ ℃ Operating Temperature Range Storage Temperature Range Tstg * IFP condition: pulse width ≤1ms ,duty cycle ≤1/10 ◆ Electrical Optical Characteristics（Ta=25℃） Parameter Test Symbol Min Typ. Max. Unit Luminous Intensity IV 2790 -- -- mcd IF =30mA Luminous Flux ￠ 9.0 -- -- lm IF =30mA CCT 4500 -- 8000 K IF =30mA Forward Voltage VF 3.0 -- 3.6 V IF =30mA Color Rendering Index Ra 70 -- IF =30mA Reverse Current IR -- -- 10 uA VR=5V Spectral Line Half Width Δλ -- 30 -- nm IF=30mA Viewing Angle 2θ1/2 -- 120 -- Deg. IF =30mA Correlated Color Temperature Condition Notes: 1.Tolerance of Luminous Intensity±10%. 2.Tolerance of CCT ±150K. 3.Tolerance of Forward Voltage±0.05V. 4.Optical characteristic is measured by HB’s equipment. Prepared date：Aug. 2011 www.ledz.com Rev.：0 Page 3 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ◆ BIN range Forward voltage (tolerance is ±0.05V @ IF=30mA): BIN CODE Min.(V) Max. (V) T 3.0 3.2 U 3.2 3.4 V 3.4 3.6 Luminous intensity (tolerance is ±10% @ IF=30mA ): BIN CODE Min.(mcd) Max. (mcd) V 2790 3410 W 3410 4030 X 4030 4650 Chromaticity Coordinates & Bin grading diagram(IF=30mA): 4500 4750 5000 N7 5300 N1 D25 N8 5700 D19 N2 D26 6000 N9 D13 D20 D27 6500 D7 N3 D14 N10 D21 D28 7000 D8 D1 N4 D15 N11 D22 7500 D2 C42 8000 D9 D29 D16 N5 D23 C36 C43 D3 D10 D17 C37 C44 N12 D30 N6 D24 D4 D11 D18 C38 C45 D5 D12 C39 C46 D6 C40 C47 C41 Bin range of Chromaticity Coordinates (tolerance is ±0.005@ IF=30mA): Please refer to CIE 1931 Chromaticity diagram Prepared date：Aug. 2011 www.ledz.com Rev.：0 Page 4 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ◆ Soldering Pad Dimensions: Unit:mm Tolerance:±0.1mm ◆ Soldering Conditions (Maximum allowable soldering conditions) • Reflow soldering should not be done more than two times. • Do not stress its resin while soldering. • After soldering, do not warp the circuit board. • Pay attention to electrostatic（ESD）. Prepared date：Aug. 2011 www.ledz.com Rev.：0 Page 5 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ◆ Package Tape Specifications: (3000±3 pcs/Reel) 前空至少80pcs 后空至少80pcs 装材料部分，标准包装3000 270m 485mm 500m 245m 160mm 290m 12 Reels in one Box Prepared date：Aug. 2011 6 Boxes in one Carton www.ledz.com Rev.：0 Page 6 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ◆ Typical Electro-Optical Characteristics Curves： If(mA) 50 5.0 40 4.0 30 3.0 20 2.0 10 1.0 0 Vf(V) 2.8 2.4 3.6 3.2 4.0 If(mA) 0.0 30 0 4.4 Forward Current vs. Forward Voltage 60 120 90 150 Relative Luminous Intensity vs. Forward Current 1.0 2.0 0.8 1.0 0.6 0.5 0.4 0.2 0.2 Ta( ℃) 0.1 WL(nm) 0.0 400 450 500 550 600 -40 650 -20 -10 0 10 20 30 40 60 80 100 Relative Luminous Intensity vs. Ambient Temperature Relative Luminous Intensity vs. Wavelength If(mA) 90 0° 100% 10° 75 20° 30° 40° 60 50° 45 60° 50% 30 70° 80° 15 Ta( ℃) 0 0 20 40 60 80 60° 30° 0% 50% 100% Relative Luminous Intensity vs.Radiation Angle Maximum Forward Current vs.Ambient Temperature Prepared date：Aug. 2011 90° 0% 90° 100 www.ledz.com Rev.：0 Page 7 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ◆ Reliability (1)Test Items and Conditions Test Item Standard Test Conditions Test Method A.TA=230±5℃ Reflow Soldering Damaged TIME=30-60S B.TA=240±5℃ TIME=110-120S JEITA ED-4701 300 301 Number of Note C.TA=260±5℃ TIME=10±1S 1 time 0/50 D.TA=230±5℃ TIME=30-60S High Temperature Storage JEITA ED-4701 200 201 TA=100±5℃ 1000 Hrs 0/50 Low Temperature Storage JEITA ED-4701 200 202 TA=-40±5℃ 1000 Hrs 0/50 Temperature Humidity Storage JEITA ED-4701 100 103 TA=85±5℃，RH=90%RH 1000 Hrs 0/50 Thermal Shock Test JEITA ED-4701 300 307 -40℃ 15min 100 Cycles 0/50 Temperature Cycling Test JEITA ED-4701 100 105 -40℃ ~ 25℃ 100 Cycles 0/50 1000 Hrs 0/50 Operating Life Test ~ 100℃ 10 Second 15 min 30min 15min MIL-STD-750:1026 MIL-STD-883:1005 TA=25℃ JIS C 7021 :B-1 ~100℃ ~25℃ 30min 15min IF=30mA (2)Criteria of judging the damage Item Symbol Test Conditions Forward Voltage VF Luminous Intensity Criteria for Judgment Min. Max. IF =30 mA --- Initial Data ×1.1 IV IF =30 mA Initial Data × 0.8 --- Reverse Current IR VR = 5V --- ≦50µA Wave length λD/λP IF=Test Current / Initial Data±2nm Appearance / View check Prepared date：Aug. 2011 www.ledz.com No mechanical damage Rev.：0 Page 8 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED ◆ Cautions 1、Package When moisture is absorbed into the package it may vaporize and expand during soldering. There is a possibility that this can cause exfoliation of the contacts and damage to the optical characteristics of the LEDs. So the moisture proof package is used to keep moisture to a minimum in the package. 2、Storage Before opening the package: The LEDs should be kept at 5~30°C and 60%RH or less. The LEDs should be used within a year. After opening the package: The LED must be used within 24 hours, else should be kept at 5~30℃ and 30% RH or less. The LEDs should be used within 7days after opening the package. If unused LEDs remain, they should be stored in moisture proof packages, recommended to return the LEDs to the original moisture proof bag and to reseal the moisture proof bag again. If the LEDs have exceeded the storage time, baking treatment should be performed more than 24 hours at 60 ± 5°C. 3、Soldering Iron Each terminal is to the tip of soldering iron temperature less than 300℃ for 3 seconds within once in less than the soldering iron capacity 25 W.Leave two seconds and more internals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 4、Repairing Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 5、The LED electrode sections are comprised of a gold plated. The gold surface may be affected by environments which contain corrosive gases and so on. Please avoid conditions which may cause the LED to corrode or discolor. This corrosion or discoloration may cause difficulty during soldering operations. It is recommended that the User use the LEDs as soon as possible. 6、Please avoid rapid transitions in ambient temperature, especially in high humidity environments where condensation can occur. Prepared date：Aug. 2011 www.ledz.com Rev.：0 Page 9 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED 7、Static Electricity 7.1、These products are sensitive to static electricity charge, and users are required to handle with care. Particularly, if an current and or voltage which exceeds the Absolute Maximum Rating of Products is applied, the overflow in energy may cause damage to, or possibly result in electrical destruction of, the Products. The customer is requested to take adequate countermeasures against static electricity charge and surge when handling Products. 7.2、Proper grounding of Products , use of conductive mat, conductive working uniform and shoes, and conductive containers are effective against static electricity and surge. 7.3、Ground low-resistance areas where the product contacts, such as metal surfaces of the work platform, with a conductive mat (surface resistance 106-108 Ω ). 7.4、A tip of soldering iron is requested to be grounded. An ionizer should also be installed where risk of static generation is high. ◆ Notes: 1、Above specification may be changed without notice. We will reserve authority on material change for above specification. 2、When using this product, please observe the absolute maximum ratings and the instructions for the specification sheets. We assume no responsibility for any damage resulting from use of the product which does not comply with the instructions included in the specification sheets. Prepared date：Aug. 2011 www.ledz.com Rev.：0 Page 10 of 10