BT105S thru BT110S SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 1.0 Ampere BTS FEATURES .071(1.8) .055(1.4) ●Rating to 1000V PRV ●Ideal for printed circuit board ●Lead tin plated copper MECHANICAL DATA .030(0.75) .018(0.45) ●Polarity:Symbol molded on body .157(4.0) .142(3.6) - + ~ ~ molded plastic technique results in inexpensive product .014(.35) .006(.15) .106(2.7) .09(2.3) ●Mounting position :Any .043(1.1) .027(0.7) .276(7.0) .260(6.6) C0.5 ●Reliable low cost construction utilizing .197(5.0) .181(4.6) .063(1.6) .047(1.2) .008(0.2) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL BT105S BT11S BT12S BT14S BT16S BT18S BT110S UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current (Note 1) Peak Forward Surge Current @T A=40 ℃ 8.3ms Single Half Sine-Wave I(AV) 1.0 A IFSM 30 A VF 1.1 V Super Imposed on Rated Load(JEDEC Method) Peak Forward Voltage at 1.0A DC Maximum DC Reverse Current @T J=25℃ at Rated DC Bolcking Voltage @T J=125℃ Typical Junction Capacitance Per Element (Note2) Thermal Resistance (Note3) Thermal Resistance (Note4) Operating Temperature Range Storage Temperature Range IR 5.0 500 μA CJ 10 pF RθJA 95 ℃/W RθJC 30 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ NOTES:1.Mounted on P.C. board. 2.Measured at1.0MHz and applied reverse voltage of 4.0V DC. 3.Thermal resistance junction to ambient 4.Thermal resistance junction to case REV. 1, 08-Nov-2012 RATING AND CHARACTERTIC CURVES BT105S thru BT110S FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT AVERAGE FORWARD CURRENT AMPERES 1.0 0.8 0.6 0.4 MOUNTED ON BOARD SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.2 0.1 20 40 60 100 80 120 160 140 PEAK FORWARD SURGE CURRENT, AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 40 30 20 10 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 0 1 2 AMBIENT TEMPERATURE, ℃ 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL REVERSE CHARACTERISTICS FIG.4-TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT,(A) 10 TJ=125°C 10 1.0 TJ=25°C 0.1 0.01 0 20 40 60 80 100 120 140 1.0 0.1 TJ=25°C PULSE WIDTH:300us 2% DUTY CYCLE 0.01 0 PERCENT OF RATED PEAK REVERSE VOLTAGE，(%) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE,VOLTS FIG.5-TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE(PF) INSTANTANEOUS REVERSE CURRENT,(µA) 5 10 TJ=25°C，f=1MHZ 1.0 1 4 10 REVERSE VOLTAGE， VOLTS 100 REV. 1, 08-Nov-2012