Data Sheet Mechanical Drawing Dot for pin 1 28.5 MAX TO09161 YYWW General Information Customer Part Number Revision Description Date Reference Doc Control # Issue (For ICE use only) Item Inductance (HP-4284A) Leakage Inductance DCR TO09161 3 Transformer NOV-10-2010 OPP11142 1011-959P -Specification Pins Spec 1–3 1 2 4 unit:mm Sample Test Data Test Condition 65 kHz, 1 Vrms, series 240 mOhms max (9,10) – (6,7) 24 mOhms max 1 10 5 12 uH max 5–4 25 deg C 840 mV +/- 3mV 60 mV +/- 3mV 10 kHz, i/p: 1 – 6,7= 1040 mV, short (3 – 5, 4 – 9,10) 140 mV +/- 3 mV 4242Vac, 60Hz, 1 mA, 1 minute Schematic Remark Footprint 1 5.0 10 9,10 9 8 7 1) This is RoHS compliant product. 2) Operating temperature is -40degC to +130degC. (Ambient + temperature) 6 20.3 3 4 3 65 kHz, 1 Vrms, series 750 mOhms max 0.7 SQ 3.0 MIN 1000 uH +/- 10% 1 – 3 short (6,7,9,10) 1–3 1–3 Voltage Ratio & 5–4 Phasing Test (9,10) – (6,7) (1,3,4,5) – (6,7,9,10) Hi – Pot (6,7,9,10) – Core 29.5 MAX 21.0 MAX ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 6,7 1 2 3 4 5 TOP VIEW 5 Sample approval is required before release to production. Sample specifications take precedence over customer specifications. unit:mm Rev. 3 Description Initial release PRD CHK Emily APP Date NTFY Cha. Cha. L. L. Chou 2010/11/10 2010/11/10 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 1