Data Sheet Mechanical Drawing 780 nH +/- 10% 600 nH min 0.6 0.1 MAX for co-planarity 1.8+/-0.15 (X2) 6.9 MAX Item IN08130 0 Inductor AUG-07-2009 ---Specification Pins Spec Inductance @0Adc S - F Inductance @Isat at S-F 25degC DCR S-F 12.5 MAX 12.4 MAX General Information Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) 9.25 MAX 5.6 MAX ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 IN08130 YYWW 2.5 +/- 0.3 7.8 +/- 0.25 unit:mm Sample Test Data Test Condition 500 kHz, 1Vrms, series 500 kHz, 1Vrms, series (41Adc) 1.4 mOhms+/- 10% +25 deg C Isat at 25degC S-F 41 Adc max Isat at +125degC S-F 30 Adc max Idc S-F 23 Adc max Recommended PCB Layout Schematic Remark 1. 5.0 S 2. 4.0 10.4 F Sample approval is required before release to production. Sample specifications take precedence over customer specifications. 3. 4. unit:mm Rev. 0 Description Initial release 5. Isat is the current at which the inductance drops by 20%. Idc is the current at which the temperature of the part increases by 50 deg C. Inductance vs. Current Curve, Temperature vs. Current Curve and Temperature vs. DCR as attached. This is RoHS compliant product. The max operating temperature is 130degC (ambient + temperature rise). PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/8/7 2009/8/7 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN08130 Inductance vs. Current +25 degC 100.0 % Inductance 90.0 +125 degC 80.0 70.0 60.0 50.0 40.0 0 5 10 15 20 25 30 35 40 45 Current (A) Temperature(degC) Temperature VS Current 120.0 100.0 80.0 60.0 40.0 20.0 0.0 0 5 10 15 20 25 30 Current (DC) DCR(mOhm) Temperature VS DCR 2.300 2.200 2.100 2.000 1.900 1.800 1.700 1.600 1.500 1.400 1.300 20 30 40 50 60 70 80 90 100 110 120 130 140 160 170 180 Temperature (Deg C) PAGE 2 OF 2