Data Sheet Mechanical Drawing 7.35 MAX 10.5 MAX General Information Item 5.8 MAX Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) IN08050 1 Inductor AUG-07-2009 ---Specification Pins Spec Inductance @0Adc S - F Inductance @Isat at S-F 25degC 9.4 MAX ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 IN08050 YYWW 0.1 max for coplanarity 1.5+/-0.1 (X2) 2.0 +/- 0.3 6.2 +/- 0.3 unit:mm Sample Test Data Test Condition 680 nH +/- 15% 500 nH min 1 MHz, 0.1Vrms, series 1 MHz, 0.1Vrms, series (21Adc) 1.2 mOhm typical +25 deg C (1.5 mOhm max) 21 Adc max DCR S-F Isat at 25degC S-F Isat at +125degC S-F 16 Adc max Idc S-F 22 Adc max Schematic Remark Recommended PCB Layout 1. Isat is the current at which the inductance drops by 15%. 2. Idc is the current at which the temperature of the part increases by 50 deg C. 3. Inductance vs. Current Curve and Temperature vs. Current Curve as attached. 4. This is RoHS compliant product. 3.61 S 2.5 F 8.69 5. The max operating temperature is 130degC unit:mm Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 1 Description Initial release (ambient + temperature rise). PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/8/7 2009/8/7 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N:IN08050 Inductance vs. Current 100.0 90.0 80.0 70.0 +125 degC 60.0 50.0 40.0 0 5 10 15 20 25 30 35 Current (A) Temperature VS Current Temperature(degC) % Inductance +25 degC 140.0 120.0 100.0 80.0 60.0 40.0 20.0 0.0 0 5 10 15 20 25 30 Current (DC) PAGE 2 OF 2