Data Sheet Mechanical Drawing 4.2 MAX ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 300 YYWW 1.25+/-0.1 4.0 max General Information Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) IN07159 0 Inductor AUG-07-2009 ---- Item Inductance 4.1 max 0.1 max for co-planarity (a) 1.3+/-0.25(X2) (b) unit:mm Specification Spec Pins Sample Test Data Test Condition S-F 30 nH +/- 6 nH S-F 20.5 nH min DCR S-F Isat at +25degC S-F 65 Adc max Isat at +125degC S-F 52 Adc max 1 MHz, 0.1Vrms, series 1 MHz, 0.1Vrms, series (65 Adc) 0.32 mOhm +/- 10% +25 deg C Recommended PCB Layout Schematic 1. 1.6 S Remarks 2. 2.0 4.2 F Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 0 Description Initial release 3. 4. Isat is the current at which the inductance drops by 15% typ. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. This is RoHS compliant product. Inductance vs. Current Curve as attached. unit:mm PRD CHK APP Date NTFY Emily L. L. Chou 2009/8/7 2009/8/7 Gary __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN07159 Inductance vs. Current 100.0 % Inductance 90.0 +25 degC 80.0 +125 degC 70.0 60.0 50.0 40.0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 Current (A) PAGE 2 OF 2