Surface Mount LED J Series for low current or superbright use, 0428 Series 1.8 mm Round The 0428 series lamps are miniature lens type designed for surface mounting. The high intensity is achieved by molding a focusing lens onto the substrate. These lamps measure approximately 2.4 x 3.2 mm. These lamps are in EIA481 tape and reel packaging with 1000pcs per reel. 3.2 2.4 + - 1.8Ø 2.6 AAA AA AA AAA AAAAA 2.5 2.0 2.0 2.5 2.5 Suggested pad dimensions for reflow soldering GENERAL INFORMATION Operating Temperature Range Storage Temperature Range Reflow Soldering Temperature -40 °C to +85 °C -40 °C to +90 °C 260 °C for 5 sec max APPLICATION INFORMATION (ALL RATINGS AT 25 °C AMBIENT) Peak Part No. JRC0428 Emitted Color Red λ Absolute Maximum Ratings ∆λ Pd If (mA) Ir E/O Characteristics Iv (mcd) @If=20mA Vr Vf (V) @ If=20mA 2Θ1/2 (nM) (nM) (mW) dc 1/10 duty @ 1 khz @Vr=5V (µA) (V) 2mA Min Typ Min Typ (Deg) 632 20 60 25 160 10 5 15 99 240 2.0 2.4 30 JGC0428 Green 575 20 60 25 160 10 5 6 66 99 2.0 2.4 30 JYC0428 Yellow 591 15 60 25 160 10 5 15 99 247 2.0 2.4 30 JOC0428 Orange 621 18 60 25 160 10 5 15 99 247 2.0 2.4 30 JEC0428 OrRed 639 20 60 25 160 10 5 12 92 194 2.0 2.4 30 JYOC0428 YelOrng 611 17 60 25 160 10 5 15 99 247 2.0 2.4 30 Specifications subject to change without notice. Dimensions are in mm±0.3 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0508 J–14 013S-J0428