38 - ILSI America, Inc.

2 Lead Metal Package Crystal, 3 mm x 8 mm, 2 mm x 6 mm, 1 mm x 5 mm
Product Features:
38 / 26 / 15 Series
Applications:
Small Package Option
Compatible with Leadfree Processing
Low Cost
Real Time Clocks
Metering
Industrial Control
Time Reference
30 KHz to 192.000 KHz (15 package only available at
32.768 KHz)
Frequency
ESR (Equivalent Series Resistance)
30 KHz – 31.9 KHz
32 KHz – 39.9 KHz
40 KHz – 59.9 KHz
60 KHz – 99.9 KHz
100 KHz – 192 KHz
15 Package (32.768Khz Only)
40 K: Max.
26 Package
40 K: Max.
35 K: Max.
30 K: Max.
25 K: Max.
20 K: Max.
38 Package
30 K: Max.
30 K: Max.
30 K: Max.
25 K: Max.
20 K: Max.
Shunt Capacitance (C0)
0.8 pF to 1.7 pF Typical
Frequency Tolerance @ 25q C
r20 ppm Standard (see Part Number Guide for more options)
Frequency Stability over
Temperature
Parabolic -0.034 ppm / q C Typical. Inflection point approx.
27q C., See Table Below
Crystal Cut
X cut
Load Capacitance
12.5 pF Standard
Drive Level
1 µW Max.
Aging
r5 ppm Max. / Year Standard
2
Temperature
Operating
-40q C to +85q C Standard (see Part Number Guide for more
options)
Storage
-40q C to +85q C Standard
ppm
Typical X Cut Tem perature Coefficient
0
-30
-60
-90
-120
-150
-180
-40
-30
-20
-10
0
10
20
30
40
50
60
70
80
Tem perature
Part Number Guide
Package
38 (3 mm X 8 mm)
26 (2 mm X 6 mm)
15 (1 mm X 5 mm)
Sample Part Number:
Stability
(ppm) at Room
Temperature
Stability
(ppm) over Operating
Temperature
B = ±50 ppm
26-HX1F12.5 – 32.768 KHz
Operating
Temperature Range
Load Capacitance
(pF)
Frequency
12.5 pF Standard.
- 32.768 KHz
0 = 0°C to +50°C
F = ±30 ppm
1 = 0°C to +70°C
G = ±25 ppm
2 = -10°C to +60°C
H = ±20 ppm
Mode
(overtone)
X = X Cut
3 = -20°C to +70°C
I = ±15 ppm
5 = -40°C to +85°C
J = ±10 ppm
9 = -10°C to +50°C
F = Fundamental
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected]
[email protected] www.ilsiamerica.com
• www.ilsiamerica.com
06/09
Specifications subject to change without notice
Page 1
2 Lead Metal Package Crystal, 3 mm x 8 mm, 2 mm x 6 mm, 1 mm x 5 mm
Pb Free Solder Reflow Profile:
38 / 26 / 15 Series
Typical Circuit:
*Units are backward compatible with 240C reflow processes
Package Information:
MSL = 2a
Termination = e1 (Sn / Cu / Ag over Ni over Kovar base metal).
Environmental Specifications
Thermal Shock
Moisture Resistance
Mechanical Shock
Mechanical Vibration
Resistance to Soldering
Heat
Hazardous Substance
Solderability
Terminal Strength
Gross Leak
Fine Leak
Solvent Resistance
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2007, Condition A
J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max)
Pb-Free / RoHS / Green Compliant
JESD22-B102-D Method 2 (Preconditioning E)
MIL-STD-883, Method 2004, Test Condition D
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s
MIL-STD-202, Method 215
Marking
N/A –Packaging only
[email protected] www.ilsiamerica.com
• www.ilsiamerica.com
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected]
06/09
Specifications subject to change without notice
Page 2