2 Lead Metal Package Crystal, 3 mm x 8 mm, 2 mm x 6 mm, 1 mm x 5 mm Product Features: 38 / 26 / 15 Series Applications: Small Package Option Compatible with Leadfree Processing Low Cost Real Time Clocks Metering Industrial Control Time Reference 30 KHz to 192.000 KHz (15 package only available at 32.768 KHz) Frequency ESR (Equivalent Series Resistance) 30 KHz – 31.9 KHz 32 KHz – 39.9 KHz 40 KHz – 59.9 KHz 60 KHz – 99.9 KHz 100 KHz – 192 KHz 15 Package (32.768Khz Only) 40 K: Max. 26 Package 40 K: Max. 35 K: Max. 30 K: Max. 25 K: Max. 20 K: Max. 38 Package 30 K: Max. 30 K: Max. 30 K: Max. 25 K: Max. 20 K: Max. Shunt Capacitance (C0) 0.8 pF to 1.7 pF Typical Frequency Tolerance @ 25q C r20 ppm Standard (see Part Number Guide for more options) Frequency Stability over Temperature Parabolic -0.034 ppm / q C Typical. Inflection point approx. 27q C., See Table Below Crystal Cut X cut Load Capacitance 12.5 pF Standard Drive Level 1 µW Max. Aging r5 ppm Max. / Year Standard 2 Temperature Operating -40q C to +85q C Standard (see Part Number Guide for more options) Storage -40q C to +85q C Standard ppm Typical X Cut Tem perature Coefficient 0 -30 -60 -90 -120 -150 -180 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 Tem perature Part Number Guide Package 38 (3 mm X 8 mm) 26 (2 mm X 6 mm) 15 (1 mm X 5 mm) Sample Part Number: Stability (ppm) at Room Temperature Stability (ppm) over Operating Temperature B = ±50 ppm 26-HX1F12.5 – 32.768 KHz Operating Temperature Range Load Capacitance (pF) Frequency 12.5 pF Standard. - 32.768 KHz 0 = 0°C to +50°C F = ±30 ppm 1 = 0°C to +70°C G = ±25 ppm 2 = -10°C to +60°C H = ±20 ppm Mode (overtone) X = X Cut 3 = -20°C to +70°C I = ±15 ppm 5 = -40°C to +85°C J = ±10 ppm 9 = -10°C to +50°C F = Fundamental ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] [email protected]• www.ilsiamerica.com • www.ilsiamerica.com 06/09 Specifications subject to change without notice Page 1 2 Lead Metal Package Crystal, 3 mm x 8 mm, 2 mm x 6 mm, 1 mm x 5 mm Pb Free Solder Reflow Profile: 38 / 26 / 15 Series Typical Circuit: *Units are backward compatible with 240C reflow processes Package Information: MSL = 2a Termination = e1 (Sn / Cu / Ag over Ni over Kovar base metal). Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking N/A –Packaging only [email protected]• www.ilsiamerica.com • www.ilsiamerica.com ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] 06/09 Specifications subject to change without notice Page 2