E-Series I/Q Demodulator — 410 - 430 MHz EKIN2-420DX EKIN2-420DX E-Series I/Q Demodulator 410 - 430 MHz Features • • • SM-92 Package Excellent Phase and Amplitude Balance LO Power +10 dBm Typical Surface Mount Description M/A-COM’s EKIN2-420DX is a passive, surface mount I/Q Demodulator. Ideally suited for Direct Demodulation in PMR/ TETRA applications. Electrical Specifications @25°C Parameter Frequency Range LO / RF 410 - 430 I/Q DC - 1 Amplitude Unbalance Phase Unbalance Isolation Units Typical Minimum Maximum MHz MHz — — — — — — dB 0.5 — 1.0 Degrees 2.0 — 3.0 dB dB 55 42 40 40 — — dB 6.4 — 8.0 dBm +10 ± 1 — — LO to RF LO to I/Q Conversion Loss (LO) Carrier Power Q= -90° for RF>LO V1.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. S 1377 B E-Series I/Q Demodulator — 410 - 430 MHz EKIN2-420DX Functional Configuration Absolute Maximum Ratings Parameter Absolute Maximum Function Pin No. Operating Temperature -10°C to +70°C LO 1 Storage Temperature -55°C to +100°C RF 8 Impedance 50 Ohms Nominal I 5 RF Power (1dB Compression) 4 dBm Max Q 6 Amplitude Unbalance External 50 Ohms — Case Ground 3,4,7 Not Connected — Phase Unbalance 0.40 100.00 0.35 95.00 0.30 90.00 85.00 degrees dB 0.25 0.20 0.15 80.00 75.00 0.10 70.00 0.05 65.00 0.00 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 Frequency (MHz) 60.00 0.30 0.40 0.50 0.60 0.70 0.80 0.90 V1.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. 1.00 Frequency (MHz) S 1377 B