Optoway PT-57130 ********************************************************************************************************************************************************* 3.3V / 1.55 µm / 1.25 Gbps InGaAs PIN-TIA Receiver PT-57130 Series ************************************************************************************************************************************************************ FEATURES ² InGaAs/InP PIN Photodiode with AGC transimpedance amplifier ² Differential ended output ² 1.55 µm high sensitivity, 1.3 µm high rejection ² Single +3.3V operation ² Speed Up to 1.25 Gbps ² - 40 ~ +85 ºC operation temperature DESCRIPTION PT-57130 series is designed as optical receivers with transimpedance amplifier. Their wide dynamic ranges, differential outputs are suited for Datacom and Telecom applications , especially Gigabit Ethernet, Fiber Channel, and SONET OC-24/SDH STM-8. AC / ELECTRICAL AND OPTICAL CHARACTERISTICS (TC=25°C) Symbol Parameter Test Conditions Dectection Range Min. Typ. Max. Unit 1480 1550 1600 nm* 75 Avtive Area G Differential Gain AC coupled, load=50Ω 6 BW Bandwidth -3 dB point 850 Psat Saturation Power λ=1300nm -3 Sens Sensitivity Rout Output Resistance -12 BER=10 @1.25Gb/s 8 - - - 50 μm 10 V/mW dBm -21 dBm 65 ohm 1250 Speed MHz Mbps Note: *: At least 30 dB isolation for wavelength 1260 nm to 1360 nm DC / ELECTRICAL CHARACTERISTICS (TC=25°C) Symbol VCC ICC Parameter Power Supply Supply Current (no load) Min. Typ. Max. Unit 3.1 3.3 3.5 V - - 30 mA ABSOLUTE MAXIMUM RATING (TC=25 ºC) Symbol Parameter Value 4.5 Unit Operating Temperature -40~+85 ºC Storage Temperature -40~+85 ºC V Voltage Topr Tstg V ************************************************************************************************************************************************************ OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 2/1/2003 V2.0 Optoway PT-57130 ********************************************************************************************************************************************************* MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT Note: Specifications subject to change without notice. ORDER INFORMATION Part No.: Code Blank 3 5 P T −5 Wavelength 1310/1550 nm 1310 nm 1550 nm 7 1 3 0 □ Code PIN Assignment Blank Type A B Type B ************************************************************************************************************************************************************ OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 2/1/2003 V2.0