1400 PROVIDENCE HIGHWAY • BUILDING 2 NORWOOD, MASSACHUSETTS 02062-5015 WWW.INTRONICS.COM S10 SERIES DC/DC MODULES Applications • Servers, Switches and Data Storage • Wireless Communications • Distributed Power Architecture • Semiconductor Test Equipment • Networking Gear • Data Communications • Telecommunications • Industrial / Medical The S10 Family of high efficiency non-isolated DC/DC converters offer power levels of up to 50 Watt, which exceeds that of other Industry-standard SIPs with the same package, while also providing ultra-wide input voltage range for 3.3Vin and 5Vin. These converters provide versatility without sacrificing the board space. All models feature an input filter and regulated outputs. The open-frame construction facilitates maximum power delivered with the highest efficiency of up to 94%. All converters combine creative design practices with highly derated power devices to achieve very high reliability, high performance and low cost solution to systems designers. INPUT SPECIFICATIONS : Input Voltage Range: 5V 3.0 – 5.5V 5V 4.5 – 5.5V 12V - 10.8 – 13.2V Positive Logic Remote on/off Control : Module ON………………………..Open Circuit or <0.4VDC Module OFF…………………………………>+2.8VDC to Vin Specifications & Features Summary OUTPUT SPECIFICATIONS : • Industry Standard SIP Pinout Voltage Accuracy…………………....……………….........…±1.0% max. • High Efficiency to 94% Transient Response :25% Step Load Change............….......<200u sec. • 300KHz Switching Frequency Ripple and Noise, 20MHz BW Note3......……………..20mV rms max. • 3.3, 5 & 12VDC Input Range 75mV pk-pk max. • Over Temperature Protection Temperature Coefficient....................….………….......±0.03%/C max. • Continuous Short Circuit Protection Short Circuit Protection...................…....…………………..Continuous • Remote ON/OFF Line Regulation, Note1..….………...…………………….....±0.2% max. Load Regulation, Note2………………….........…………....±0.5% max. External Trim Adj. Range………………………………….…..……±10% GENERAL SPECIFICATIONS : INPUT CURRENT Efficiency...........................................………..…………............See Table ％ MODEL INPUT OUTPUT OUTPUT SIZE Isolation Voltage...................................……..………....…....Non-isolation EFF. NO LOAD FULL LOAD NUMBER VOLTAGE VOLTAGE CURRENT Operating Ambient Temperature Range...…..…...…….... -40℃ to +71℃ S10-5S1.2 3.0 –5.5VDC 1.2 VDC 10 A 60 mA 2824mA 85 SIP Derating, Above 71℃ ……………..…. Linearly to Zero Power at +100℃ SIP S10-5S1.5 3.0 –5.5VDC 1.5 VDC 10 A 60 mA 3448mA 87 Storage Temperature Range ...…............……....…....... -40℃ to +120℃ SIP S10-5S1.8 3.0 –5.5VDC 1.8 VDC 10 A 60 mA 4045mA 89 Dimensions.........................……......………….……. 2 x 0.55 x 0.34 inches SIP S10-5S2.5 3.0 –5.5VDC 2.5 VDC 10 A 70 mA 5435mA 92 (50.8 x 14.07x 8.6 mm) SIP S10-5S3.3 4.5 –5.5VDC 3.3 VDC 10 A 70 mA 7021mA 94 Cass Material..….………………………Non-potted With Open Frame Type SIP PRELIMINARY S10-12S1.2 10.8–13.2VDC 1.2 VDC 10 A 50 mA 1176mA 85 S10-12S1.5 10.8–13.2VDC 1.5 VDC 10 A 50 mA 1453mA 86 SIP NOTE : S10-12S1.8 10.8–13.2VDC 1.8 VDC 10 A 50 mA 1724mA 87 SIP 1. Measured From High Line to Low Line S10-12S2.5 10.8–13.2VDC 2.5 VDC 10 A 50 mA 2148mA 91 SIP 2. Measured From Full Load to Zero Load S10-12S3.3 10.8–13.2VDC 3.3 VDC 10 A 60 mA 2957mA 93 SIP S10-12S5 10.8–13.2VDC 5 VDC 10 A 60 mA 4432mA 94 SIP 3. The output noise is measured with 10uf tantalum capacitor and 1uf ceramic capacitor across output. Typical at Ta= +25 ºC under nominal input voltages of 3.3V, 5V and 12VDC, unless noted. The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Consult factory for hundreds of other available input/output voltage configurations. CASE SIP 0.34(8.6) 2.00(50.8) 0.20(5.1) 0.55(14.0) 6 7 8 9 10 11 1 2 3 4 5 0.17(4.3) 0.03(0.8) 1.00(25.4) 0.05(1.3) 0.50(12.7) 0.40(10.2) 0.25(6.4) LAYOUT PATTERN TOP VIEW 0.34(8.6) Dimmension In Inches(mm) All Dimensions All in inches (mm); tolerance •xx = ± 0.04, •xxx = ±0.010 Tolerance : .XX=¡ Ó0.04 .XXX=¡ Ó0.010 • 0.11(2.8) PIN CONNECTION Pin FUNCTION 1 +Output 2 +Output 3 +Sense 4 +Output 5 Common 6 Common 7 +V Input 8 +V Input 9 No Pin 10 Trim 11 On/Off Control • Intronics, Inc. 1400 Providence Highway, Building 2, Norwood, MA 02062-5015 Phone: 1-800-367-0004, 1-781-551-5500 Fax: 1-781-551-5555 Rev. A