OmniAssure™ MIFARE and DESFire Readers Smart card technology is ideally suited for access control, MIFARE Easy Ordering Programme logical (PC) access, storage of biometric templates, parking, OmniAssure offers an easy-to-order and easy-to-use MIFARE ePurse and many other applications requiring reliable solution. Prior knowledge of MIFARE encryption and technology read/write cards. MIFARE Classic and DESFire are widely used is not required as a selection of pre-programmed MIFARE classic for these applications. cards and matching configured readers are available to order. OmniAssure™ from Honeywell is a range of 13.56 MHz Transition from HID PROX to MIFARE or DESFire contactless smart card readers that offers superb reliability, consistent read range and ease of installation. Each OmniAssure reader incorporates smart card technology allowing the user to Access control systems that need to switch from HID PROX card based technology to a MIFARE Classic or DESFire card based solution can easily do so with OmniAssure. support MIFARE Classic and DESFire 0.6 applications and multiple applications on each card simultaneously. MIFARE / DESFire Projects OmniAssure readers can retrofit most standard Honeywell or For MIFARE Classic or DESFire 0.6 projects, with special Wiegand-output proximity systems and are easy to install without encryption and data file setting requirements, OmniAssure Card the need to rewire. Reader versions include smart card reader Serial Number (CSN) readers can be used. As such, the only, smart card reader plus keypad, and a multi-technology installation can be tested technically prior to setting the reader to smart card/prox transit reader. All wall-mount readers are sold as a project specific encrypted mode. The readers can also be set mullion with an optional gangbox mounting kit. on site to encrypted mode using configuration cards. FEATURES • Compatible with ISO14443 13.56MHz RFID technologies - MIFARE® Classic - DESFire® 0.6 • Compatible with 125kHz RFID technologies - 125 kHz HID® Prox • Easily order MIFARE Classic cards like proximity cards (off the shelf ordering) • Easily order Mifare reader for indoor and outdoor use • Flash-on-card technology can be used to manage security keys and change the operating characteristics of the reader • Project management is optionally available • Mullion and switch plate mounting • Built-in audible buzzer • Two LEDs (red and green) • Potted for weather resistance • Configurable output - Wiegand (Default) - Clock and Data - ISO7811 Clock & Data ABA Track 2 emulation - Serial (RS232/RS422/RS485) OmniAssure™ MIFARE and DESFire Readers BENEFITS Easy to use, encrypted yet Typically when installers get asked for a MIFARE solution, often they suggest MIFARE Card Serial cost-effective Number (CSN) reading options. The CSN solution provides a similar level of security as standard proximity cards and is usually time-consuming to implement into the customer's access control system. However, the Honeywell OmniAssure MIFARE range includes crypted card numbers on cards with matching readers, all without any prior knowledge of MIFARE technology. World wide sourcing = ISO14443 is open because NXP Semiconductors has sold Mifare® Classic chips and licensed Standard Open DESFire, and SmartMX technologies to multiple reader manufacturers. This ensures longevity of an ISO14443 solution with multiple sourcing options. Hence the Mifare technology is available to many manufacturers and vendors for secure and multi-application use of the Mifare Card. Multi-Technology = Multi-technology OmniAssure readers transition easily from 125 kHz proximity to smart card Transition Friendly technologies by interchangeably reading 125 kHz proximity and contactless smart cards. In facilities with a large ratio of cardholders to readers, this approach is often more cost effective than applying smart tags/stickers to 125 kHz proximity cards. MIGRATION OPTIONS Control Panel 125 kHz HID Prox Card Current Situation With Prox Technology Proximity Reader Future Door Prox/Keypad Reader Proximity Reader MIGRATION OPTION 1: Conversion using Dual-Tech Cards Dual-Tech Card (125 kHz + Smart = Mifare, DESFire, etc.) OPTION 2: Conversion using Dual-Tech Readers 125 kHz HID Prox Card OT30 OT35 OT70 OT75 OT31 • Readers can be replaced one by one • Cards can be replaced one by one • OT70 & OT75 fingerprint readers can be added • Cards are less expensive than dual-tech cards • OT30 & OT35 readers are less expensive than dualtech readers • Cardholder database is not required to be updated initially – OR – Control Panel Required Situation with Smart Card Technology OT36 OmniAssure Dual-Tech Readers OmniAssure Smart Only Readers Dual-Tech Card (125 kHz + Smart = Mifare, DESFire, etc.) OT30 Control Panel Smart Card = Mifare, DESFire, etc OT35 OT30 OT35 125 kHz HID Prox Card OT31 Smart Card = Mifare, DESFire, etc OT36 OT31 OT36 OmniAssure™ MIFARE and DESFire Readers SPECIFICATIONS OT30HONBM OT31HONBM OT35HONBM OT36HONBM OT30HONBS OT31HONBS OT35HONBS OT36HONBS OT30HONBD OT31HONBD OT35HONBD OT36HONBD Dimensions - reader only 14.2 x 4.6 x 2.5 cm (reader only) or 14.2 x 7.3 x 3.0 cm (with gang box mounting plate (IEMOUNTB)) Keypad N/A ISO support Data Encryption 2 x 6 keypad N/A MIFARE classic encryption available between card and reader 14443A-1,2,3,4: Reads DESFire 0.6 credentials, (CSN) or project DESFire 0.6 File reader UL294/cUL, FCC, CE, RoHS -30ºC to 60ºC 0 to 95% relative humidity (non-condensing) Operating Humidity 5 - 24 VDC Operating Voltage Range 8 wire removable terminal block Termination Optional (IETAMPERB) Tamper Output (all built-in) Wiegand (Keypad - four bit per keystroke) (all built-in) Wiegand, can be reprogrammed to RS232, RS485, Clock & Data or custom format (Keypad - four bit per keystroke) IP Rating IP55 Warranty Limited Lifetime OT30HONBM Application 2 x 6 keypad CSN is not encrypted. Only available CSN is not encrypted. Only available after reprogramming to MIFARE after reprogramming to DESFire 0.6 File Classic sector reading reading: DES and 3DES Encryption Operating Temperature MIFARE / DESFire Reader N/A 14443A-1,2,3: Reads MIFARE, DESFire credentials, (CSN) or MIFARE project Sector reader 14443A-1,2,3: Reads MIFARE Regulatory Approvals Panel Interfaces 2 x 6 keypad OT35HONBM OT30HONBS OT35HONBS OT30HONBD OT35HONBD MIFARE Classic Sector Reader MIFARE Classic and DESFire CSN Reader MIFARE DESFire CSN Reader Reads OmniAssure encrypted MIFARE Classic credentials (output in 26 or 34 bit). Reads MIFARE and DESFire CSN (output 36 bit) Reads MIFARE and DESFire CSN (output 56 bit) Reads DESFire CSN (output 56 bit) 68mA avg, 81mA peak Current (@12VDC) OmniAssure MIFARE credential read range (read range specified for OmniAssure Credentials, other MIFARE manufacturers may vary) 1k MIFARE (OFP1N26, OFP1N34 programmed) 3,0 cm 3,0 cm CSN N/A 1k MIFARE (OFP1N00) 3,0 cm CSN N/A 4k MIFARE (OFP4N00) 3,0 cm CSN N/A Proximity and 1k MIFARE (OFH1N26, OFH1N34) 3,0 cm 3,0 cm CSN N/A Proximity and 1k MIFARE (OFH1N0026SP, OFH1N0034SP MIFARE unprogrammed) 3,0 cm CSN N/A 4k DESFire (ODP4N00) 3,0 cm CSN 3,0 cm CSN MIFARE / DESFire / HID Prox Transition Reader Application OT31HONBM OT36HONBM OT31HONBS OT36HONBS OT31HONBD OT36HONBD MIFARE Classic Sector and HID Prox Reader MIFARE Classic and DESFire CSN1 and HID Prox Reader MIFARE DESFire CSN and HID Prox Reader Reads OmniAssure encrypted MIFARE Classic credentials (output in 26 or 34 bit). Reads HID PROX Credentials. Reads MIFARE and DESFire CSN (output 56 bit). Reads HID PROX Credentials. Reads DESFire CSN (output 56 bit). Reads HID PROX Credentials. 79mA avg, 96mA peak Current (@12VDC) OmniAssure MIFARE credential read range (read range specified for OmniAssure Credentials, other MIFARE manufacturers may vary) 1k MIFARE (OFP1N26, 3,8 cm N/A 3,8 cm CSN OFP1N34 programmed) N/A N/A 3,8 cm CSN 1k MIFARE (OFP1N00) N/A N/A 3,8 cm CSN 4k MIFARE (OFP4N00) N/A 3,8 cm CSN 3,8 cm CSN 4k DESFire (ODP4N00) HID Prox credential read range 3,2 cm Proximity (PVC-H-4, PVC-H-5) OmniAssure™ MIFARE and DESFire Readers ORDERING READERS CREDENTIALS MIFARE Classic Sector Reader and MIFARE CSN Programmed MIFARE Classic cards compatible with OT3xHONBM OT30HONBM MIFARE reader OT35HONBM MIFARE reader with keypad OFP1N34 OFK1N34 OFP1N26 OFK1N26 MIFARE Transit Sector Reader and 125 kHz HID Prox OT31HONBM MIFARE transit reader OT36HONBM MIFARE transit reader with keypad MIFARE 1K PVC card, 34 bit format MIFARE 1K Key fob, 34 bit format MIFARE 1K PVC card, 26 bit format MIFARE 1K Key fob, 26 bit format MIFARE multi technology cards compatible with OT3xHONBM OFH1N34 MIFARE 1K and HID Prox PVC card, both programmed with same card number, 34 bit format OFH1N26 MIFARE 1K and HID Prox PVC card, both programmed with same card number, 26 bit format MIFARE CSN Reader - MIFARE Classic Project reader MIFARE Classic unprogrammed cards OT30HONBS MIFARE reader OT35HONBS MIFARE reader with keypad OFP1N00 OFK1N00 OFP4N00 OFK4N00 MIFARE Transit CSN Reader and 125 kHz HID Prox - Project reader OT31HONBS MIFARE transit reader OT36HONBS MIFARE transit reader with keypad Unprogrammed MIFARE 1K PVC card Unprogrammed MIFARE 1K Key fob Unprogrammed MIFARE 4K PVC card Unprogrammed MIFARE 4K Key fob MIFARE multi technology cards OFP1N0034SP Unprogrammed MIFARE 1K, Programmed 34-bit HID Prox PVC card OFP1N0026SP Unprogrammed MIFARE 1K, Programmed 26-bit HID Prox PVC card DESFire CSN Reader - DESFire 0.6 Project reader DESFire 0.6 unprogrammed cards OT30HONBD DESFire reader ODP4N00 Unprogrammed DESFire 0.6 4K PVC card OT35HONBD DESFire reader with keypad ODK4N00 Unprogrammed DESFire 0.6 4K Key fob DESFire Transit CSN Reader and 125 kHz HID Prox - Project reader OT31HONBD DESFire transit reader OT36HONBD DESFire transit reader with keypad OmniAssure Miscellaneous Reader Parts IEMOUNTB Gangbox mounting kit for OT30, OT31, OT35, OT36 models IETAMPERB Tamper switch accessory for all readers For MIFARE specialised project management tools please consult with your local representative OmniAssure™ is a trademark of Honeywell International Inc. Mifare® and DESFire® are trademarks of NXP Semiconductors N.V. HID®,HID®Prox and ISOProx® are trademarks of HID Global. For additional information, please visit www.honeywell.com/security/me Honeywell Security Group LOB Building 08, Office 199 P.O.Box 18530, Jebel Ali Dubai United Arab Emirates (UAE) Tel: +971-4-8073200 www.honeywell.com HAS-OMNIASSURE-02-ME(0411)DS-E April 2011 © 2011 Honeywell International Inc.