+105°C High Frequency Low Impedance Radial Lead Aluminum Electrolytic Capacitors LSR For all applications including switching power supplies FEATURES Highest reliability, up to 5,000 hours Low impedance Wide capacitance range: .47 µF to 6,800 µF Voltage range: 6.3 WVDC to 63 WVDC Solvent tolerant end seals standard SPECIFICATIONS Capacitance Tolerance ±20% at 120Hz, 20°C Operating Temperature Range -55°C to +105°C Dissipation Factor 120Hz, 20°C WVDC 6.3 10 16 25 35 50 63 tan δ .24 .20 .16 .14 .12 .10 .09 Note: For above D.F. specifications, add .02 for every 1,000 µF above 1,000 µF Impedance Ratio (Max.) @120Hz WVDC 6.3 10 16 25 35 50 63 -55/20°C WVDC Time 4 4 3 3 3 2 2 Leakage Current ≤ 63 WVDC 1 minute 2 minutes .03 CV or 4 µA .01 CV or 3 µA whichever is greater 5,000 hours at 105°C with rated WVDC and rated ripple current (D≤6.3: 2000 hrs, D=8: 3000 hrs.) Load Life Capacitance change Dissipation factor Leakage current < 20% of initial measured values <200% of initial specified value <Initial specified value 1,000 hours at 105°C with no voltage applied. Units will meet load life specifications. Shelf Life Frequency(Hz) Capacitance (µF) 60 0.75 120 1.0 300 1.35 1K 1.57 10K 2.0 +105°C 1.0 +85°C 1.7 +65°C 2.2 +45°C 2.4 100-470 0.8 1.0 1.23 1.34 1.5 1.0 1.7 2.2 2.4 1,000+ 0.85 1.15 1.0 1.7 2.2 2.4 Ripple Current Multipliers ≤47 SPECIAL ORDER OPTIONS • • Temperature(°C) Special tolerances: ±10% (K), -10% + 30% (Q) Epoxy end seal • Polyester sleeve 1.0 1.13 1.1 (See pages 37 thru 41) • Tape and Reel/Ammo Pack • Cut, Formed, Cut and Formed, and Snap In Leads 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 84 +105°C High Frequency Low Impedance Radial Lead Aluminum Electrolytic Capacitors LSR PHYSICAL DIMENSIONS WVDC (SV) (µF) 6.3 (8) 35 (44) 25 (32) 16 (20) 10 (13) 50 (63) 0.47 5x11 1.0 5x11 2.2 5x11 3.3 5x11 4.7 5x11 6.8 5x11 63 (79) 5x11 10 33 6.3x11 5x11 6.3x11 5x11 47 6.3x11 5x11 68 100 8x11.5 6.3x11 5x11 6.3x11 6.3x11 150 8x11.5 10x12.5 6.3x15 8x11.5 10x15 10x20 8x11.5 10x12.5 10x20 10x25 6.3x11 8x11.5 10x12.5 10x15 10x25 12.5x20 330 6.3x11 8x11.5 10x12.5 10x15 10x20 10x31.5 12.5x25 470 8x11.5 10x12.5 10x15 10x20 10x31.5 12.5x25 16x25 10x15 10x20 10x31.5 12.5x25 16x20 16x31.5 1,000 10x20 10x31.5 12.5x25 12.5x31.5 16x31.5 16x35.5 1.500 10x31.5 12.5x25 12.5x31.5 12.5x40 16x40 18x40 220 680 2,200 10x31.5 12.5x25 12.5x31.5 12.5x40 16x35.5 3,300 12.5x25 12.5x35.5 12.5x40 16x35.5 18x40 4,700 12.5x35.5 16x31.5 16x35.5 18x40 16x35.5 18x35.5 6,800 16x31.5 10,000 16x40 15,000 18x40 DxL(mm) Convert to inches, divide by 25.4 15.0 MIN d PVC SLEEVE - 19.0 MIN + L1 Aluminum Electrolytic 5x11 22 D1 NOTE: Case Vent is standard on all diameter ≥8.0mm S1 D 5.0 6.3 8.0 10.0 12.5 16 18 S 2.0 2.5 3.5 5.0 5.0 7.5 7.5 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 B 0.5 0.5 0.5 0.5 0.8 0.5 0.5 L ≤ 20, L1= L + 1.5mm Max. L > 20, L1= L + 2.0mm Max. D1= D + B Max. D = 12.5 and L>25,d=0.8 S1= S ± 0.5 Max. (mm) 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 85 LSR +105°C High Frequency Low Impedance Radial Lead Aluminum Electrolytic Capacitors STANDARD PART LISTING Capacitance WVDC (µF) PART NUMBER Maximum Ripple Current ESR +105°C (mA) Ω 100kHz/120Hz 120Hz,+20°C Impedance 100kHz Ω 20°C/-10°C Dimensions DxL (mm) Capacitance WVDC (µF) PART NUMBER Maximum Ripple Current ESR +105°C (mA) Ω 100kHz/120Hz 120Hz,+20°C Impedance 100kHz Ω 20°C/-10°C Dimensions DxL (mm) 0.47 50 474LSR050M 352.74 24 / 12 3.900 / 7.800 5x11 470 10 477LSR010M 0.71 590 / 470 0.130 / 0.260 10x12.5 1.0 50 105LSR050M 165.79 38 / 19 3.500 / 7.000 5x11 470 16 477LSR016M 0.56 760 / 605 0.090 / 0.180 10x15 2.2 50 225LSR050M 75.36 56 / 28 3.000 / 6.000 5x11 470 25 477LSR025M 0.49 1010 / 800 0.065 / 0.130 3.3 50 335LSR050M 50.24 70 / 35 2.600 / 5.200 5x11 470 35 477LSR035M 0.42 1420 / 1130 0.046 / 0.092 10x31.5 4.7 50 475LSR050M 35.27 82 / 41 2.200 / 4.400 5x11 470 50 477LSR050M 0.35 1490 / 1190 0.044 / 0.088 12.5x25 6.8 50 685LSR050M 24.38 92 / 46 1.800 / 3.600 5x11 470 63 477LSR063M 0.32 1640 / 1310 0.042 / 0.084 16x25 10 63 106LSR063M 14.92 135 / 66 1.060 / 2.120 5x11 680 10 687LSR010M 0.49 775 / 640 0.090 / 0.180 22 35 226LSR035M 9.04 160 / 83 0.750 / 1.500 5x11 680 16 687LSR016M 0.39 1030 / 850 0.065 / 0.130 22 63 226LSR063M 6.78 215 / 110 0.520 / 1.040 6.3x11 680 25 687LSR025M 0.34 1380 / 1140 0.046 / 0.092 10x31.5 33 25 336LSR025M 7.03 85 / 150 0.800 / 1.600 5x11 680 35 687LSR035M 0.29 1610 / 1330 0.035 / 0.072 12.5x25 33 50 336LSR050M 5.02 235 / 130 0.430 / 0.860 6.3x11 680 50 687LSR050M 0.24 1630 / 1350 0.040 / 0.080 16x20 47 16 476LSR016M 5.64 155 / 93 0.800 / 1.600 5x11 680 63 687LSR063M 0.22 2050 / 1700 0.032 / 0.064 16x31.5 47 35 476LSR035M 4.23 265 / 155 0.340 / 0.680 6.3x11 1,000 10 108LSR010M 0.33 1060 / 915 47 63 476LSR063M 3.17 365 / 215 0.250 / 0.500 8.0x11.5 1,000 16 108LSR016M 0.27 1400 / 1210 0.047 / 0.094 68 10 686LSR010M 4.88 155 / 97 0.800 / 1.600 5x11 1,000 25 108LSR025M 0.23 1640 / 1420 0.036 / 0.072 12.5x25 68 25 686LSR025M 3.41 260 / 160 0.360 / 0.720 6.3x11 1,000 35 108LSR035M 0.20 1970 / 1710 0.029 / 0.058 12.5x31.5 68 50 686LSR050M 2.44 410 / 255 0.200 / 0.400 8x11.5 1,000 50 108LSR050M 0.17 2180 / 1890 0.030 / 0.060 16x31.5 68 63 686LSR063M 2.19 500 / 315 0.190 / 0.380 10x12.5 1,000 63 108LSR063M 0.15 2360 / 2050 0.027 / 0.054 16x35.5 100 6.3 107LSR6R3M 3.98 150 / 100 0.850 / 1.700 5x11 1,500 10 158LSR010M 0.24 1440 / 1290 0.045 / 0.090 10x31.5 100 16 107LSR016M 2.65 265 / 175 0.350 / 0.700 6.3x11 1,500 16 158LSR016M 0.20 1620 / 1450 0.036 / 0.072 12.5x25 100 25 107LSR025M 2.32 380 / 250 0.240 / 0.480 6.3x15 1,500 25 158LSR025M 0.18 1960 / 1760 0.029 / 0.058 12.5x31.5 100 35 107LSR035M 1.99 465 / 305 0.160 / 0.320 8x11.5 1,500 35 158LSR035M 0.15 2360 / 2120 0.024 / 0.048 12.5x40 100 50 107LSR050M 1.66 565 / 370 0.160 / 0.320 10x15 1,500 50 158LSR050M 0.13 2400 / 2160 0.026 / 0.052 16x40 100 63 107LSR063M 1.49 750 / 495 0.120 / 0.240 10x20 2,200 6.3 228LSR6R3M 0.21 1470 / 1320 0.043 / 0.086 10x31.5 150 10 157LSR010M 2.21 260 / 180 0.350 / 0.700 6.3x11 2,200 10 228LSR010M 0.18 1710 / 1530 0.034 / 0.068 12.5x25 150 25 157LSR025M 1.55 455 / 315 0.160 / 0.320 8x11.5 2,200 16 228LSR016M 0.15 2010 / 1800 0.028 / 0.056 12.5x31.5 150 35 157LSR035M 1.33 625 / 435 0.120 / 0.240 10x12.5 2,200 25 228LSR025M 0.14 2360 / 2120 0.024 / 0.048 12.5x40 150 50 157LSR050M 1.11 810 / 565 0.100 / 0.200 10x20 2,200 35 228LSR035M 0.12 2700 / 2430 0.020 / 0.040 16x35.5 150 63 157LSR063M 0.99 950 / 660 0.090 / 0.180 10x25 2,200 50 228LSR050M 0.11 2560 / 2300 0.024 / 0.048 18x40 220 10 227LSR010M 1.51 290 / 209 0.560 / 1.120 6.3x11 3,300 6.3 338LSR6R3M 0.15 1690 / 1520 0.034 / 0.068 12.5x25 220 16 227LSR016M 1.21 460 / 335 0.160 / 0.320 8x11.5 3,300 10 338LSR010M 0.13 2140 / 1920 0.026 / 0.052 12.5x35.5 220 25 227LSR025M 1.06 600 / 435 0.130 / 0.260 10x12.5 3,300 16 338LSR016M 0.12 2390 / 2150 0.023 / 0.046 12.5x40 220 35 227LSR035M 0.90 760 / 550 0.090 / 0.180 10x15 3,300 25 338LSR025M 0.10 2610 / 2340 0.020 / 0.040 16x35.5 220 50 227LSR050M 0.75 1030 / 745 0.075 / 0.150 10x25 3,300 35 338LSR035M 0.09 3040 / 2730 0.017 / 0.034 18x40 220 63 227LSR063M 0.68 1100 / 800 0.072 / 0.144 12.5x20 4,700 6.3 478LSR6R3M 0.12 2100 / 1890 0.028 / 0.056 12.5x35.5 330 6.3 337LSR6R3M 1.21 295 / 245 0.056 / 1.120 6.3x11 4,700 10 478LSR010M 0.11 2440 / 2190 0.023 / 0.046 16x31.5 330 10 337LSR010M 1.00 460 / 350 0.160 / 0.320 8x11.5 4,700 16 478LSR016M 0.09 2650 / 2380 0.020 / 0.040 16x35.5 330 16 337LSR016M 0.80 625 / 480 0.120 / 0.240 10x12.5 4,700 25 478LSR025M 0.08 2960 / 2660 0.018 / 0.036 16x40 330 25 337LSR025M 0.70 745 / 570 0.095 / 0.190 10x15 6,800 6.3 688LSR6R3M 0.09 2370 / 2130 0.024 / 0.048 16x31.5 330 35 337LSR035M 0.60 1030 / 790 0.060 / 0.120 10x20 6,800 10 688LSR010M 0.08 2690 / 2420 0.020 / 0.040 16x35.5 330 50 337LSR050M 0.50 1240 / 950 0.055 / 0.110 10x31.5 6,800 16 688LSR016M 0.08 2890 / 2600 0.018 / 0.036 18x35.5 330 63 337LSR063M 0.45 1420 / 1090 0.049 / 0.098 12.5x25 10,000 6.3 109LSR6R3M 0.07 2750 / 2470 0.020 / 0.040 16x40 470 6.3 477LSR6R3M 0.85 500 / 415 8x11.5 15,000 6.3 159LSR6R3M 0.05 2960 / 2660 0.018 / 0.036 18x40 NOTE 1: NOTE 2: NOTE 3: NOTE 4: 0.290 / 0.580 WVDC: MAXIMUM RATED DC WORKING VOLTAGE AT +105°C. SVDC: MAXIMUM RATED DC SURGE VOLTAGE AT +105°C. DISSIPATION FACTOR (tan δ) MAXIMUM;120 Hz, +25°C. ESR: MAXIMUM EQUIVALENT SERIES RESISTANCE; 120 Hz, +25°C MINIMUM CAPACITANCE, MAXIMUM DISSIPATION FACTOR. NOTE 5: NOTE 6: NOTE 7: NOTE 8: 0.060 / 0.120 10x20 10x15 10x20 10x20 10x31.5 MAXIMUM LEAKAGE CURRENT; RATED WVDC, 1 MINUTE, +25°C. RMS RIPPLE CURRENT; 120Hz, +105°C CAPACITANCE TOLERANCE IS MEASURED AT 120 Hz, +25°C. ALL MEASUREMENTS ARE PERFORMED USING THE BRIDGE METHOD. 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 86