OPTOWAY SPS

Optoway
SPS-5120WG
1
***********************************************************************************************************************************************************************
SPS-5120WG / SPS-5120AWG (RoHS Compliant)
3.3V / 1310 nm / 622 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with SONET OC-12 IR-1 / SDH STM-4
(S-4.1)
l SFF-8472 Digital Diagnostic Function
l Distance up to 20km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l -10 to 85oC Operation : SPS-5120WG
l -40 to 85oC Operation : SPS-5120AWG
l Class 1 Laser International Safety Standard IEC 60825
Compliant
The SPS-5120WG series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as IR SONET OC-12 /
SDH STM-4 and Fiber Channel. It is with the SFP 20-pin
connector to allow hot plug capability. Digital diagnostic
functions are available via an I2C. This module is designed
for single mode fiber and operates at a nominal wavelength
of 1310 nm. The transmitter section uses a multiple
quantum well laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC.
APPLICATIONS
LASER SAFETY
l
l
l
l
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ATM Switches and Routers
SONET / SDH Switch Infrastructure
XDSL Applications
Metro Edge Switching
ORDER INFORMATION
P/No.
SPS-5120WG
SPS-5120AWG
Bit Rate
(Mb/s)
622
622
SONET Distance Wavelength
Package
Temp. TX Power RX Sens. RoHS
/SDH
(km)
(nm)
(oC)
(dBm)
(dBm) Compliant
IR-1/S-4.1
20
1310
LC SFP with DMI -10 to 85 -8 to -14
-28
Yes
IR-1/S-4.1
20
1310
LC SFP with DMI -40 to 85 -8 to -14
-28
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Power Supply Voltage
Symbol
Tstg
Topr
Vcc
Min
-40
-10
-40
-0.5
Max
85
85
85
3.6
Units
o
C
o
C
Min
3.1
-10
-40
Typ
3.3
Max
3.5
85
85
200
622
300
Notes
SPS-5120WG
SPS-5120AWG
V
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Case Temperature
Power Supply Current
Data Rate
Symbol
Vcc
Topr
ICC (TX+RX)
Units / Notes
V
o
C / SPS-5120WG
o
C / SPS-5120AWG
Air flow 1m/sec
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V3.0
Optoway
SPS-5120WG
2
***********************************************************************************************************************************************************************
Transmitter Specifications (-10 oC < Topr < 85 oC, 3.1V < Vcc < 3.5V)
Parameter
Symbol
Min
Typ
Max
Units
Optical
Optical Transmit Power
Po
-14
---8
dBm
Output Center Wavelength
1274
1310
1355
nm
λ
Output Spectrum Width
----4
nm
∆λ
Extinction Ratio
ER
8.2
----dB
Output Eye
Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957
Optical Rise Time
tr
1.2
ns
Optical Fall Time
tf
1.2
ns
Relative Intensity Noise
RIN
-120
dB/Hz
Electrical
Data Input Current – Low
IIL
-350
µA
Data Input Current – High
IIH
350
µA
Differential Input Voltage
VIH - V IL
0.5
2.4
V
TX Disable Input Voltage – Low
TDIS, L
0
0.5
V
TX Disable Input Voltage – High
TDIS, H
2.0
Vcc
V
TX Disable Assert Time
T ASSERT
10
µs
TX Disable Deassert Time
TDEASSERT
1
ms
TX Fault Output Voltage -- Low
TFaultL
0
0.5
V
TX Fault Output Voltage -- High
TFaultH
2.0
Vcc+0.3
V
1. Output power is power coupled into a 9/125 µm single mode fiber.
2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Notes
1
RMS (σ)
10 % to 90% value
10% to 90% value
Peak-to-Peak
2
2
3
3
Receiver Specifications (-10oC < Topr < 85oC, 3.1V < Vcc < 3.5V)
Parameter
Symbol
Min
Typ
Max
Optical
Sensitivity
Sens
-28
Maximum Input Power
Pin
-5
Signal Detect -- Asserted
Pa
---28
Signal Detect -- Deasserted
Pd
-40
----Signal detect -- Hysteresis
1.0
--Wavelength of Operation
1100
--1600
Electrical
Differential Output Voltage
VOH – VOL
0.6
2.0
Output LOS Voltage -- Low
VOL
0
0.5
Output LOS Voltage -- High
VOH
2.0
Vcc+0.3
4. Measured at 2 23-1 PRBS at BER 1E-10.
5. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Units
dBm
dBm
dBm
dBm
dB
nm
V
V
V
Notes
4
4
Transition: low to high
Transition: high to low
5
5
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V3.0
Optoway
SPS-5120WG
3
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
Signal Name
1
2
3
TX GND
TX Fault
TX Disable
4
MOD-DFE2
5
MOD-DEF1
6
MOD-DEF0
7
8
9
10
N/C
LOS
RX GND
RX GND
Description
PIN
Transmitter Ground
Transmitter Fault Indication
Transmitter Disable (Module disables
on high or open)
Modulation Definition 2 – Two wires
serial ID Interface
Modulation Definition 1 – Two wires
serial ID Interface
Modulation Definition 0 – Ground in
Module
Not Connected
Loss of Signal
Receiver Ground
Receiver Ground
11
12
13
RX GND
Receiver Ground
RX DATA OUT- Inverse Receiver Data Out
RX DATA OUT+ Receiver Data Out
Signal Name
Description
14
RX GND
Receiver Ground
15
Vcc RX
Receiver Power – 3.3V±5%
16
Vcc TX
Transmitter Power – 3.3V±5%
17
18
19
20
TX GND
TX DATA IN+
TX DATA INTX GND
Transmitter Ground
Transmitter Data In
Inverse Transmitter Data In
Transmitter Ground
Module Definition
Module Definition
MOD-DEF2
PIN 4
MOD-DEF1
PIN 5
MOD-DEF0
PIN 6
Interpretation by Host
4
SDA
SCL
LV-TTL Low
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V3.0
Optoway
SPS-5120WG
4
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
VeeT
Tx_DISABLE
Tx_FAULT
(1,17,20)
3
Tx_DISABLE
2
Tx_FAULT
4.7K to 10KΩ
LD
Driver
TD +
18
TD -
19
TD +
Z=50Ω
100Ω
TD Z=50Ω
VccT
1μH
16
Vcc 3.3V
10μF
10nF
10μF
10nF
SerDes
IC
1μH
VccR
15
10μF
10nF
RD -
12
Protocol
IC
RD Z=50Ω
100Ω
POST
Amp
RD +
13
RD +
Z=50Ω
4.7K to 10KΩ
LOS
VeeR
MOD_DEF(0)
EEPROM
MOD_DEF(1)
MOD_DEF(2)
SFP module
depending on SERDES
8
LOSS OF SINGAL
(9,10,11,14)
6
MODULE DETECT
5
SCL
4
SDA
4.7K to 10KΩ
4.7K to 10KΩ
Vcc 3.3V
4.7K to 10KΩ
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V3.0