RS3A~RS3M Surface Mount Fast Recovery Rectifiers Major Ratings and Characteristics IF(AV) 3.0 A 50 to 1000V VRRM 100 A IFSM 150nS,250S,500S trr VF 1.3 V Tj max. 150 °C Features ● ● ● ● ● ● ● Low profile package Ideal for automated placement Glass passivated chip junction Fast switching for high efficiency High forward surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC Mechanical Date ● ● ● Case: JEDEC DO-214AB molded plastic over glass passivated chip Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D Polarity: Laser band denotes cathode end Maximum Ratings & Thermal Characteristics & Electrical Characteristics (TA = 25 °C unless otherwise noted) Symbol RS3A RS3B RS3D RS3G RS3J RS3K RS3M UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current IF(AV) 3 A Peak forward surge current 8.3 ms single half sinewave superimposed on rated load IFSM 100 A Maximum instantaneous forward voltage at 3.0A VF 1.3 V Maximum DC reverse current at Rated DC blocking voltage IR 5.0 50 μA T A = 25 ℃ T A = 125℃ Maximum reverse recovery time at IF = 0.5 A , IR = 1.0 A , Irr = 0.25 A trr Typical junction capacitance at 4.0 V ,1MHz CJ 30 pF RθJL 35 ℃/ W TJ,TSTG –55 to +150 ℃ Thermal resistance from junction to Lead Operating junction and storage temperature range http://www.trr-jx.com 150 250 500 nS RS3A~RS3M Surface Mount Fast Recovery Rectifiers Characteristic Curves (TA=25 ℃ unless otherwise noted) http://www.trr-jx.com