HER601 THRU HER608 Ultra Fast Rectifiers R-6 FEATURES · Plastic package has Underwriters Laboratory Flammability Classification 94V-O ctilizing Flame Retardant Epoxy Molding Compound. · Void-free Plastic in a R-6 package. · 6.0 ampere operation at T A=55℃ With no thermal runaway. · Ultra Fast switching for high efficiency. · Exceeds environmental standards of MIL-S-19500/228 MECHANICAL DATA Case: Molded plastic, R-6 Terminals: Axial leads, solderable per MIL-STD-202, method 208 guaranteed Polarity: Band denotes cathode Mounting position: Any Dimensions in inches and (millimeters) Weight: 0.07ounce, 2.1gram Maximum Ratings and Electrical Characteristics Ratings at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60H Z, resistive or inductive load. For capacitive load, derate current by 20%. Symbols HER601 HER602 HER603 HER604 HER605 HER606 HER607 HER608 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 300 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 210 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 300 400 600 800 1000 Volts Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at T A=55℃ I(AV) 6.0 Amp IFSM 200 Amp Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 6.0A and TA=25℃ Maximum Reverse Current at TJ=25℃ at Rated DC Blocking Voltage T J=100℃ VF 1.0 1.3 1.7 10.0 IR Volts uAmp 1000 Typical Junction Capacitance (Note 1) CJ 100 65 pF Maximum Reverse Recovery Time (Note 2) TRR 50 75 nS Typical Thermal Resistance (Note 3) RθJA 10 ℃/W TJ，Tstg -55 to +150 ℃ Operating and Storage Temperature Range NOTES: 1- Measured at 1 MH Z and applied reverse voltage of 4.0 VDC. 2- Reverse Recovery Test Conditions：IF=.5A，IR=1A，IRR=.25A. 3- Thermal Resistance from Junction to Ambient at 0.375"(9.5mm) lead length P.C.B. Mounted. http://www.trr-jx.com HER601 THRU HER608 Ultra Fast Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.trr-jx.com