Designed and Manufactured in Germany Specification Oscillator type: Rev.: 4 Date: 2014-04-04 AXE20 Crystal Oscillator (SPXO) in double-sealed DIL14 package Parameter min. typ. max. Unit 150 MHz 1 Frequency range Frequency stability Overall stability (Note 2) ±10 to ±100 See table 1 See table 2 vs. operating temperature range Long term (aging) per year RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Supply voltage VS 3.15 4.75 3.3 5.0 Current consumption (steady state) (Note 3) Option 2 ±2 ppm Option 3 @ 40°C 5 60 10 3.45 5.25 45 25 pF ns % ms V V mA mA 20.7x13.1x7.5 max. 5 Palette or Tube Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1. 2. 3. 4. ppm HCMOS 15 40 Condition mm g @ VS/2 Option 1 = “33” Option 1 = ”50” Option 1 = “33” Option 1 = ”50” IEC 60679-3 CO 02 IEC 60286-3 Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated Other stabilities on request Depending on frequency and supply voltage All combinations of options might not be available. Please consult factory Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Storage Temperature -0.5 -55 VS + 10% +125 Unit Condition V °C VS to GND Overall stability and temperature range Option 2 10 15 25 50 100 Stability [ppm] ±10 ±15 ±25 ±50 ±100 Table 1 Lower Temperature Option 3 T [°C] 0 0 1 -10 2 -20 3 -30 4 -40 5 -55 Upper Temperature Option 3 T [°C] A +50 B +60 C +70 D +75 E +80 F +85 G +105 H +125 Table 2 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXE20 Rev.4 Drawing D0 Page 1(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Ordering Code Option 1 Option 2 Option 3 [Supply Voltage] [Stability] [Temperature range] AXE20 33 or 50 Table 1 Table 2 Example: AXE20-50-25-2C_Rev.4 – 10.000 MHz Model Revision Frequency [MHz] Rev.4 10.000 Enclosure drawing Pin connections Pin # 1 7 8 14 Symbol N.C. GND RF OUT Vs Function No Connection Ground RF Output Supply Voltage Handling and Testing Parameter Procedure Handling and Testing Processing Parameter Application Note AXAN-011 Application Note AXAN-012 Procedure Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany IEC60749-26 IEC60749-27 Yes Yes AXE20 Rev.4 Drawing D0 Page 2(3) HBM MM No No Source www.axtal.com www.axtal.com Condition 2000 V 200 V www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B Vibration, 2-6 5.6.7.1 201A sinusoidal* 204D Vibration, 2-64 5.6.7.3 214A random* Endurance tests 108A - ageing 5.7.1 - extended aging 5.7.2 Other environmental conditions on request MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 3.6.52 3.6.48 516.4 3.6.40 516.4-4 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 514.5 4.8.35 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] 3 4 D1 D0 01.10.2012 04.04.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Editorial changes Options updated and extended, environmental conditions updated, editorial changes AXE20 Rev.4 Drawing D0 Page 3(3) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]