Designed and Manufactured in Germany Specification Oscillator type: Rev.: 3 Date: 2014-07-08 AXIOM35LN Low Phase Noise Miniature OCXO with Sine Wave Output Parameter min. Frequency range Standard frequencies Frequency stability Initial tolerance @+25°C vs. operating temperature range (steady state) 10 operating temperature range vs. supply voltage variation vs. load change Long term (aging) per day st Long term (aging) 1 year Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load RL Output level Harmonics Phase noise @ 10 MHz (Note 3) -10 ±100 ±0.5 ±0.5 0 ±0.8 VREF/2 Positive Enclosure (see drawing) (LxWxH) Weight Packing Handling and Processing Environmental Conditions Notes: 1. 2. 3. 4. Unit 20 MHz MHz ±200 ±25 ±10 ±5 +60 ±5 ±5 ±1 ±50 ppb ppb ppb ppb °C ppb ppb ppb ppb VREF ppm V 100 +5 Sine wave 50 +8 -20 -100 -130 -145 -150 -150 3 4.75 11.4 Condition VC @ VREF/2 Option II = “25” Option II = “10” Option II = “05” (Note 2) VS ±5% RL ±10% after 30 days operation after 30 days operation kΩ 4.0 5.0 5.0 12.0 Current consumption (steady state) @ +25°C Current consumption (warm-up) Storage temperature range max. 10.000 Warm-up time Reference voltage VREF output (Note 4) Supply voltage VS typ. -40 5.25 12.6 250 150 600 300 +85 Ω dBm dBc dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz min V V V V mA mA mA mA °C 20.5x20.5x12 max. mm 10 g Palette In accordance with AXAN-012 In accordance with AXAN-013 ±10% @ 1 Hz @ 10 Hz @ 100 Hz @ 1 kHz @ 10 kHz ~ 100 kHz ∆ffinal/f0 < ±0.1 ppm Option I = “50” Option I = “12” Option I = “50” Option I = “12” Option I = “50” Option I = “12” Option I = “50” Option I = “12” IEC 60679-3 CO 41 www.axtal.com www.axtal.com Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Other operating temperature range on request Better phase noise values on request Other reference voltages on request GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIOM35LN Rev.3 Drawing D2 Page 1(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Ordering Code: Model (Specification) AXIOM35LN Option I Supply voltage 12 Option II Stability 10 Revision Frequency [MHz] Rev.3 10.000 Enclosure drawing Pin connections Pin # 1 2 3 4 5 Symbol VS RF OUT GND VC VREF Function Supply Voltage RF Output Ground Control Voltage (EFC) Reference voltage Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part ... 2-17 IEC 60679-1 clause ... 4.6.2 2-20 2-58 4.6.3 2-27 4.6.8 Test conditions Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s Vibration, sinusoidal* 2-6 4.6.7 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Other environmental conditions on request Revision History Rev. Drawing Date [dd.mm.yyyy] 3 3 D1 D2 01.10.2012 08.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Editorial changes Editorial changes AXIOM35LN Rev.3 Drawing D2 Page 2(2) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]