Specification Oscillator type: Rev.: 3 Date: 2014-04-04 AXE7050P Programmable Crystal Oscillator in 7x5 mm package Parameter Frequency range Programmable frequencies Frequency stability Overall stability Long term (aging) per year RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Jitter (peak-to-peak) Output Enable/Disable (OE) Input Supply voltage VS Current consumption (steady state) Operating temperature range Enclosure (see drawing) Weight Packing min. typ. max. 1 133 1 100 1 66 Any discrete frequency ± 100 ± 50 ± 25 ±5 HCMOS 15 5 40 60 10 65 100 65 80 Open or HIGH: RF output LOW: Tri-state output 2.50 2.7 3.00 3.15 3.3 3.45 4.75 5.0 5.25 20 25 45 0 +70 -20 +70 -40 +85 7.15x5.15x1.8 max. 2 Bulk or Tape & Reel Unit Condition MHz MHz MHz VS = 5 V VS = 3.3 V VS = 2.7 V At delivery ppm ppm ppm ppm Option 2 = “100” Option 2 = “50” Option 2 = “25” @ 40°C pF ns % ms ps ps Freq ≤ 33 MHz Freq > 33 MHz (5V) V V V mA mA mA °C °C °C Option III = “27” Option III = “33” Option III = ”50” Option III = “27” Option III = “33” Option III = ”50” Option 3 = “0C” Option 3 = “2C” Option 3 = “4C” mm g IEC 61837-2 @ VS/2 IEC 60286-3 Notes: 1. Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Storage Temperature -0.5 -55 VS + 10% +125 Unit Condition V °C VS to GND Revision Frequency [MHz] Rev.3 12.345678 Ordering Code Option 1 Option 2 Option 3 [Supply Voltage] [Stability] [Temperature range] AXE7050P 27, 33, 50 25 0C Example: AXE7050P-50-25-0C_Rev.3 – 12.345678 MHz Model GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXE7050P Rev.3 Drawing D2 Page 1(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Enclosure drawing Pin connections Pin # 1 7 8 14 Symbol OE GND RF OUT Vs Function Output Enable/Disable Ground RF Output Supply Voltage Handling and Testing Parameter Procedure Handling and Testing Processing Parameter Application Note AXAN-011 Application Note AXAN-012 Procedure Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany IEC60749-26 IEC60749-27 Yes Yes AXE7050P Rev.3 Drawing D2 Page 2(3) HBM MM No No Source www.axtal.com www.axtal.com Condition 2000 V 200 V www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B Vibration, 2-6 5.6.7.1 201A sinusoidal* 204D Vibration, 2-64 5.6.7.3 214A random* Endurance tests 108A - ageing 5.7.1 - extended aging 5.7.2 Other environmental conditions on request MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 3.6.52 3.6.48 516.4 3.6.40 516.4-4 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 514.5 4.8.35 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] 3 3 D1 D2 01.10.2012 04.04.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Editorial changes Environmental conditions updated, editorial changes AXE7050P Rev.3 Drawing D2 Page 3(3) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]