Designed and Manufactured in Germany Specification Oscillator type: Rev.: 1 Date: 2014-04-04 AXE15LN Low Phase Noise SMD SPXO with Sine Wave Output Parameter min. 10 Frequency range Frequency stability Initial tolerance vs. operating temperature range vs. supply voltage variation vs. load change st Long term (aging) 1 year Frequency adjustment range Electronic Frequency Control (EFC) RF output Signal waveform Load Output level Harmonics Start-up time Phase noise @ 100 MHz (Note 3) Supply voltage VS Unit Condition 165 MHz ppm ppm ppm ppm ppm ppm VS ± 5% RL ± 10% @ 40°C ppm on request Ω dBm dBc ms dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz V V mA °C ± 10% N.A. Sine Wave 50 +5 0 -30 4 3.15 4.75 Enclosure (see drawing) Weight Packing 3. max. ±5 ±5 ±0.5 ±0.5 ±1 Current consumption (steady state) Operating temperature range Notes: 1. 2. typ. -95 -125 -150 -155 -160 3.3 5.0 0 3.45 5.25 30 +50 14.4x9.5x6.0 max. mm g 2 Tape & Reel 10 Hz 100 Hz 1 kHz 10 kHz ≥100 kHz Option = „33“ Option = „50“ @ +25°C (Note 2) IEC 61837 CO 27 IEC 60286-3 Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated Other temperature range and stabilities on request Phase noise at other frequencies on request Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Storage Temperature -0.5 -55 VS + 10% +125 Unit Condition V °C VS to GND Ordering Code Option Revision [Supply Voltage] AXE15LN 50 Rev.1 Example: AXE15LN-50_Rev.1 – 100.000 MHz Model GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Frequency [MHz] 100.000 AXE15LN Rev.1 Drawing D0 Page 1(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing Pin connections Pin # 1 2 3 4 5 6 Symbol N.C. N.C. GND RF OUT N.C. Vs Function No Connection No Connection Ground RF Output No Connection Supply Voltage Handling and Testing Parameter Procedure Handling and Testing Processing Parameter Application Note AXAN-011 Application Note AXAN-012 Procedure Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany IEC60749-26 IEC60749-27 Yes Yes AXE15LN Rev.1 Drawing D0 Page 2(3) HBM MM No No Source www.axtal.com www.axtal.com Condition 2000 V 200 V www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B Vibration, 2-6 5.6.7.1 201A sinusoidal* 204D Vibration, 2-64 5.6.7.3 214A random* Endurance tests 108A - ageing 5.7.1 - extended aging 5.7.2 Other environmental conditions on request MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 3.6.52 3.6.48 516.4 3.6.40 516.4-4 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 514.5 4.8.35 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] Remarks Author Checked 1 D0 04.04.2014 First issue HH HH GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXE15LN Rev.1 Drawing D0 Page 3(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]