Designed and Manufactured in Germany Specification Oscillator type: Rev.: 1 Date: 2014-07-09 AXIOM15-23 Low Phase Noise SMD OCXO with Sine Wave Output Parameter min. Nominal frequency Frequency stability Initial tolerance @+25°C vs. operating temperature range operating temperature range vs. supply voltage variation vs. load change Long term (aging) per day st Long term (aging) 1 year Frequency adjustment range Electronic Frequency Control (EFC) RF output Signal waveform Load Output levels Phase noise Short-term stability (ADEV) Warm-up time @ +25°C Supply voltage VS Current consumption (steady state) Current consumption (warm-up) Operable temperature range Storage temperature range Enclosure (see drawing) (LxWxH) Weight Packing Handling and Testing Processing typ. max. Unit ±50 +85 ±3 ±3 ±1 ±100 MHz ppm ppb ppb °C ppb ppb ppb ppb VS ±5 % CL ±5 % after 30 days operation after 30 days operation pF ±5 % dBc/Hz dBc/Hz dBc/Hz dBc/Hz @ 10 Hz @ 100 Hz @ 1 kHz @ 10 kHz τ = 1 sec ∆ffinal/f0 < ±0.1 ppm 40.0000 ±100 -40 Condition steady state N.A. Clipped Sine wave 15 0 V < L < 0.3 V 0.9 V < H < 1.3 V -100 -125 -135 -140 -11 5·10 3 3.15 3.3 3.45 450 900 -45 +90 -55 +95 min V mA mA °C °C 25.6x22.2x14 max. mm 10 g Tape & Reel In accordance with AXAN-011 In accordance with AXAN-012 @ +25°C IEC 61837 CO 28 IEC 60286-3 www.axtal.com www.axtal.com Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Ordering Code: Model (Specification) AXIOM15-23 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Revision Rev1 Frequency [MHz] 40.000 AXIOM15-23 Rev.1 Drawing D4 Page 1(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing: Pin connections Pin # 1 2 3 4 5 6 7 Symbol N.C. N.C. VS RF OUT N.C. N.C. GND Function No Connection No Connection Supply Voltage RF Output No Connection No Connection Ground Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part ... 2-17 IEC 60679-1 clause ... 4.6.2 2-20 2-58 4.6.3 2-27 4.6.8 Test conditions Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s Vibration, sinusoidal* 2-6 4.6.7 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIOM15-23 Rev.1 Drawing D4 Page 2(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Revision History Rev. Drawing Date [dd.mm.yyyy] 1 1 1 D0 D1 D2 24.08.2012 31.08.2012 11.09.2012 1 1 D3 D4 12.10.2012 09.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks First issue Supply voltage changed, output signal and load changed Change of Supply voltage, output impedance, (no) EFC and output signal levels Current consumption (steady state) increased Editorial changes, customer marking deleted AXIOM15-23 Rev.1 Drawing D4 Page 3(3) Author Checked BN BN BN BN BN BN HH HH HH HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]