Max TC warranty valid calibration valid High Power Temperature Forcing System for thermal cycling of DUT’s from -60°C To +300°C Ultimate Cooling Power: 52W @ -40°C/ 185W @ 0°C Rapid Transition Rates up to 120°C/min No Compressed Air Required Fluid Free Operation MaxTC high power temperature forcing system has the greatest cooling power of any product in its field. With a temperature range of -60C to +300C MaxTC will provide solutions for all cooling and heating needs in the semiconductor industry. Designed as a high powered partner to its predecessor FlexTC, it combines all the benefits of mobility, ultra quiet operation and fluid free technology. MaxTC is the premium advancement in our company’s design history. Features e e e e e e Temperature range of -60°C to +300°C Compact Footprint – Small enough for any lab environment Self-Contained – No external chiller and no compressed air required Fluid-Free Operation Rapid Temperature Cycling Rates Maintenance-Free e e e e e e Software Calibrated Environmentally Friendly Operation ESD-SAFE Integrates into production test handlers Suitable for testing socketed and soldered devices Packages Supported: BGA Ӏ FCBGA Ӏ LGA Ӏ QFN Ӏ QFP Ӏ CSP Ӏ WLCSP Ӏ Bare Die and more Specifications: System General Maximum Temperature Minimum Temperature Temperature Accuracy Typical Transition Rates Operating Units DUT Presure Force DUT Dimensions DB Rating MTBF +300°C -60°C 0.5° C 25°C to -40°C in, < 2 minutes 25°C to +125°C in, < 1 minutes Tcase PT100 Thermisor/ Thermal-Diode through the Ethernet port. Software Calibrated Ethernet (TCP/IP) Thermal head over-temperature, Fans operation, Cooling units operation, °C 2 - 100 Kg/Force ≥ 2 x 2 mm 45 d BA 70,000hr System Enclosure mm/ (inch) System Weight Thermal head (mm) Thermal head hose L 555 (21.8) x W 450 (17.7) x H 300 (11.8) 55 KG 80mm Diameter 2 meter ( 6.5ft )standard/ 3 meter (10ft) max. Temperature Sensor Temperature Calibration Remote Interface Ports System Indicators and Fail-safes Mechanical Dimensions System Requirements Electrical Ambient Temperature Ambient Humidity Power[W] 0 13 26 52 102 140 182 220 250 Temperature [c] -60 -55 -50 -40 -20 -10 0 10 20 100/115/120/220/230/240 VAC ±10% 50/60 Hz, single phase, 10A Max. 5°C to 35 °C (40 to 95°F) 20% to 95% RH Cooling Power Graph Operator Interface 7” touch-screen controller with menu driven graphical user interface Temperature set points Preset temperature key buttons Ramp/Soak/Cycle profile programming, save and upload Ramp-rate control Stand-by operation mode Temperature overshooting control Temperature offset tables LabVIEW/C++ /MATLAB / Visual Basic/ Perl / Tickle/ Linux command interfaces Cooling Power 20 10 Temperature [°C](°C) Temperature e e e e e e e e e 0 0 50 100 -10 -20 -30 -40 -50 -60 Power [W] Power (w) 150 200 250 warranty valid calibration valid Interchangeable Device Plungers Device plungers are installed in the MaxTC thermal head by operators in the field, plungers are manufactured by our engineers to customer's specifications and are made from various materials i.e. Copper, Nickelplated copper or Aluminum (Al). * Options for RF Plungers, Alumina (Al2O3) PN# Temp Range DUT Dimensions MDDP585 MDDP588 -60°C to +175°C -45°C to +300°C ≥ 2 x 2 mm ≥ 2 x 2 mm Thermal Head Interface options: Inserting device plunger into thermal head MaxTC creates a direct contact with socketed or soldered DUTs using one of the following interface options: Custom adapter plate, Universal adapter plate, Thermocouple inserted lid, Open frame thermal lid, Boom stand arm, Pneumatic head assembly, Vacuum quick connect and MaxTC ready sockets. Please check web site for further details. Humidity and Frost Free Control e e e e MaxTC requires only 0.05CFM *purge flow rate to prevent frost & humidity. The MaxTC thermal head includes nozzles for dry air or dry nitrogen purging Purging is software controlled via the access line on the rear back panel A constant flow creates a frost and humidity free shield around the DUT * -100F dew point purge air, or Dry nitrogen 99.99% Back panel purge inlet