Top View Features Direclty mates with a comapatoble SMT adapter. Minimum real estate required A Compression plate distributes evenly 49.225mm [1.938"] Clamshell lid A 42.60mm [1.677"] 8 Materials: Side View (Section AA) 4 Assembled 38mm + IC thickness 1 1 Clam Shell Lid: Black anodized Aluminum. Height = 20 mm. 2 Socket Base: Black anodized Aluminum. Height = 6 mm. 3 Compression Plate: Black anodized Aluminum. Thickness = 12 mm. 4 Compression Screw: Clear anodized Aluminum. Height = 27 mm, Fluted Knob 5 Stamped Pin: Stamped Contact: BeCu, Au Plate Spring SS, Au Plate 6 Pogo Pin Guides: Peek 7 Pogo Pin Guide Screw: Pan head phillips, 18-8 SS, 0-80 thread, 3/16" long. 8 Latch: Black anodized Aluminum. 3 2 6 6.52mm 5 7 9 30.73mm [1.210"] 9 Substrate: 3.18mm ±0.125mm [0.125" ±0.005"] FR4/G10 or equivalent high temp material. Non-clad. 10 Pin: Brass - PS-2 Plating: 10u" Au over 50u" Ni min. 10 Plugs onto SF-BGA352E-B-42(F) IE part # CBT-BGA-6008 Drawing © 2010 IRONWOOD ELECTRONICS, INC. Tele: (952) 229-8200 www.ironwoodelectronics.com Status: Released Scale: 3:1 Rev: A Drawing: V.Panavala Date: 10/21/2010 File: CBT-BGA-6008 Dwg Modified: Recommended PCB Layout Tolerances: ±0.025mm [±0.001”] unless stated otherwise. PAGE 1 of 3 Compatible BGA Spec DETAIL D X Y DETAIL 5 0.35 Z 5 0.25 Z A E TOP VIEW A1 Z 0.15 Z 4 SIDE VIEW 0.20 DIM MIN MAX 2.45 A A1 0.6 0.4 b e 3 Øb 1. Dimensions are in millimeters. 2. Interpret dimensions and tolerances per ASME Y14.5M-1994. 3 Dimension b is measured at the maximum solder ball diameter, parallel to datum plane Z. 4 Datum Z (seating plane) is defined by the spherical crowns of the solder balls. 5 Parallelism measurement shall exclude any effect of mark on top surface of package. Ø0.25 Z X Y Ø0.10 0.70 D 23.00 BSC E 23.00 BSC e 1.0 BSC Array 22x22 BOTTOM VIEW CBT-BGA-6008 Drawing © 2010 IRONWOOD ELECTRONICS, INC. Tele: (952) 229-8200 www.ironwoodelectronics.com Status: Released Scale: 3:1 Rev: A Drawing: V.Panavala Date: 10/21/2010 File: CBT-BGA-6008 Dwg Modified: PAGE 2 of 3 Top View of Socket Base Pin A1 mark 13.72mm [0.540"] 9.11mm [0.359"] 8.50mm [0.335"] 22.00mm [0.866"] 30.09mm [1.185"] 39.00mm [1.535"] CBT-BGA-6008 Drawing © 2010 IRONWOOD ELECTRONICS, INC. Tele: (952) 229-8200 www.ironwoodelectronics.com Status: Released Scale: 1:1 Rev: A Drawing: V.Panavala Date: 10/21/2010 File: CBT-BGA-6008 Dwg Modified: All dimensions are in mm. All tolerences are +/- 0.125mm. (Unless stated otherwise) PAGE 3 of 3