MBR3505 THRU MBR3510 DC COMPONENTS CO., LTD. R RECTIFIER SPECIALISTS TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 35 Amperes FEATURES * Plastic case with heatsink for Maximum Heat Dissipation * Diffused Junction * High current capability MBR-25 * Surge overload ratings - 400 Amperes * Low forward voltage drop .500 (12.7) * High Reliability TYP. METAL HEAT SINK .310(7.9) .290(7.4) MECHANICAL DATA .480(12.2) .425(10.8) * Case: Molded plastic with heatsink * Epoxy: UL 94V-0 rate flame retardant * Terminals: Plated .25"(6.35mm) Faston lugs, Solderable per MIL-STD-202E, Method 208 guaranteed * Polarity: As marked 1.142(29.0) 1.102(28.0) .673(17.1) .633(16.1) * Mounting position: Any * Weight: 25 grams approx. HOLE FOR NO. 8 SCREW AC .673(17.1) 1.142(29.0) .633(16.1) 1.102(28.0) .732(18.6) .692(17.6) AC MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .582(14.8) .543(13.8) Single phase, half wave, 60 Hz, resistive or inductive load. .033 x .250 (0.8 x 6.4) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL MBR3505 MBR351 MBR352 MBR354 MBR356 MBR358 MBR3510 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Maximum Average Forward Rectified Output Current at Tc = 55oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage Drop per element at 17.5A DC Maximum DC Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T A = 100 oC 2 35 Amps I FSM 400 Amps VF 1.1 Volts IR 10 500 I t Rating for Fusing (t<8.3ms) 2 I t 664 Typical Junction Capacitance (Note1) CJ 300 Typical Thermal Resistance (Note 2) RθJ C 2.2 T J, T STG -55 to +150 Operating and Storage Temperature Range NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts. 2.Thermal Resistance from Junction to Case per leg. Volts IO µAmps A 2 Sec pF 0 C/W 0 C RATING AND CHARACTERISTIC CURVES (MBR3505 THRU MBR3510) 500 400 8.3ms Single Half Sine-Wave (JEDEC Mathod) 300 200 100 0 1 2 5 10 20 50 100 FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD OUTPUT CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 40 30 20 Single Phase Half Wave 60Hz Inductive or Resistive Load 10 0 50 TJ=25oC 10 Pulse Width=300ms 1% Duty Cycle 1 .6 .7 .8 .9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.3 10 1.0 .1 TJ=25oC .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) DC COMPONENTS CO., LTD. R 150 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (µA) INSTANTANEOUS FORWARD CURRENT, (A) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 .1 100 CASE TEMPERATURE, (oC) NUMBER OF CYCLES AT 60Hz KBPC MB 35005W 3505W THRU KBPC MB 3510W 3510W DC COMPONENTS CO., LTD. R RECTIFIER SPECIALISTS TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 35 Amperes FEATURES * Metal case Maximum Heat Dissipation * Surge overload ratings-400 Amperes * Low forward voltage drop MB-25W TYP MECHANICAL DATA * * * * * * Case: Metal, electrically isolated Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202E, Method 208 guaranteed Polarity: As marked Mounting position: Any Weight: 30 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) KBPC 35005W SYMBOL VRRM KBPC 3501W KBPC 3502W KBPC 3504W KBPC 3506W KBPC 3508W KBPC 3510W MB3505W MB351W MB352W MB354W MB356W MB358W MB3510W UNITS 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Maximum Recurrent Peak Reverse Voltage Maximum Average Forward Rectified Output Current at Tc = 55oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage Drop per element at 17.5A DC Maximum DC Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T A = 100 oC 2 I t Rating for Fusing (t<8.3ms) Typical Junction Capacitance ( Note1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts 2. Thermal Resistance from Junction to Case per leg. Volts IO 35 Amps I FSM 400 Amps VF 1.1 Volts IR 10 500 2 I t 664 CJ 300 RθJ C 2.2 T J, T STG -55 to + 150 uAmps A 2 Sec pF 0 C/W 0 C RATING AND CHARACTERISTIC CURVES ( KBPC35005W MB3505W DC COMPONENTS CO., LTD. R THRU KBPC3510W MB3510W )