1N4001G DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS 1N4007G TECHNICAL SPECIFICATIONS OF GLASS PASSIVATED RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES * * * * * * High reliability Low cost Low leakage Low forward voltage drop High current capability Glass passivated junction DO-41 MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202E, Method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.33 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL 1N4001G 1N4002G 1N4003G 1N4004G 1N4005G 1N4006G 1N4007G UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 75 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) 1.0 Amps I FSM 30 Amps VF 1.1 5.0 50 Maximum Instantaneous Forward Voltage at 1.0A DC Maximum DC Reverse Current @T A = 25 oC at Rated DC Blocking Voltage @T A = 100 oC Maximum Full Load Reverse Current Average, Full Cycle .375"(9.5mm) lead length at T L = 75oC IR 30 Typical Junction Capacitance (Note) Typical Thermal Resistance Operating and Storage Temperature Range NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts Volts IO CJ 15 RθJ A 50 -65 to + 175 TJ, TSTG Volts uAmps uAmps pF 0 C/ W 0 C RATING AND CHARACTERISTIC CURVES (1N4001G THRU 1N4007G) DC COMPONENTS CO., LTD. R