aocjy2 - Abracon

OVEN CONTROLLED CRYSTAL OSCILLATOR
AOCJY2 Series
ESD Sensitive
Pb
RoHS / RoHS II Compliant
FEATURES:
21.0 x 21.0 x 11.0 mm
APPLICATIONS:
• Cellular Infrastructure
• Radar Systems
• Test & Measurement Equipment
• GPS Tracking with precision hold-over accuracy
• WiMax / WLAN
• 21.0 x 21.0 x 11.0 mm Leaded- RoHS Compliant Reflow-able Package
• SC-Cut, High “Q” resonator based design
• Either Sinewave or CMOS RF output
• Available with ±30 ppb over -40°C to +75°C operating temperature range
• Tighter Stabilities to ±5.0 ppb over 0°C to +50°C also available
• Exceptional long-term Aging of ±500 ppb max. over 10-Year Product Life
• Excellent close-in phase noise (-140 dBc/Hz Max. @100Hz offset; 10MHz carrier)
STANDARD SPECIFICATIONS:
Parameters
Minimum
Typical
Maximum
Units
100.00
MHz
Notes
Notes
RF Output
Frequency
10.00
Standard Available Frequencies
10.00, 12.80, 13.00, 26.00, 38.88, 40.00, 100.00 MHz
Waveform
Level "1" (Logic High)
Level "0" (Logic Low)
Load
Rise & Fall Time
Duty Cycle
Waveform
Peak Power
Output Load
Short Term Stability
Operable Temperature Range
Overall Frequency
range
CMOS
0.9*Vdd
0.1*Vdd
15
6.0
55
45
Volts
Volts
pf
ns
%
Sinewave
2.00
dBm
Ω
/second
50
-10
2x10
-40
Alan Variance
See Stability
Options
75
ºC
0º C to +50ºC (Note #1)
±5.00
ppb
Default Spec.
-20º C to +70ºC
±10.00
ppb
Option “E”
±30.00
ppb
Option “F”
±5.00
ppb
±5.00
ppb
±100.00
3.00
1.00
3.46
ppb
Watts
Watts
Volts
Frequency Stability Options
-40º C to +75ºC
Frequency Stability vs. Supply
Voltage (Vdd ± 5%)
Frequency Stability vs. Load
Variation (± 10%)
Warm-Up @ 25 ºC
Power Consumption @ turn on
Power Consumption Steady State
Supply Voltage (Vdd)
Note #1:
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
3.13
3.30
In < 3-minutes
See Options
±5.00 ppb stability is only available for F0 < 40MHz. For frequencies above 40MHz, the best
available frequency stability is ±10.00 ppb over -20°C to +70°C
Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.12.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
OVEN CONTROLLED CRYSTAL OSCILLATOR
AOCJY2 Series
ESD Sensitive
Pb
RoHS / RoHS II Compliant
21.0 x 21.0 x 11.0 mm
STANDARD SPECIFICATIONS - continued.
Parameters
Minimum
Typical
Maximum
Units
Notes
Aging
Daily
First Year
10-Years
Spectral Content
Spurious Response
Phase Noise (10MHz Carrier) @ 5V
@ 1
Hz offset
@ 10
Hz offset
@ 100
Hz offset
@ 1,000 Hz offset
@ 10,000 Hz offset
Electrical Frequency Adjustment
Control Voltage Range (Vc)
Frequency Pull Range
Frequency Pull Slope
0.0
±0.70
ppb
ppb
ppb
-35
dBc
-90
-120
-140
-145
-150
dBc
dBc
dBc
dBc
dBc
Vdd
Volts
ppm
Positive
Control Voltage Port Impedance
Center Control Voltage
±1.0
±100
±500
10
kΩ
(Vdd/2) -0.5
Vdd/2
(Vdd/2) +0.5
Volts
2.70
4.40
-40
2.80
4.50
2.90
4.60
+100
Volts
Volts
ºC
Reference Voltage (Vdd=3.3V)
Reference Voltage (Vdd=5.0V)
Storage Temperature
Control
Voltage Port
Impedance
Center Control
Voltage
Output @ Pin#5
Output @ Pin#5
OPTIONS AND PART IDENTIFICATION (Left blank if standard)
AOCJY2 -
-
MHz -
-
Supply Voltage Option
Blank : 3.30V
A : 5.00V
Frequency in MHz
Such as; 10.000 MHz
26.000 MHz
100.000 MHz
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
RF Output Options
Blank : CMOS
SW : Sinewave
Temperature Options
E : -20°C to +70°C
F : -40°C to +75°C
Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.12.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
OVEN CONTROLLED CRYSTAL OSCILLATOR
AOCJY2 Series
ESD Sensitive
Pb
RoHS / RoHS II Compliant
21.0 x 21.0 x 11.0 mm
OUTLINE DIMENSIONS
PACKAGING: (20) units per tray
REFLOW PROFILE:
TS ma x to TL (Ramp-up Ra te)
3°C/se cond ma x.
Prehe at
Temperature Min. (TS Min.)
150°C
Temperature Typica l (T S Typ.)
175°C
Temperature Max. (TS Ma x.)
200°C
Time (tS )
60 ~ 180 s econds
Ra mp-up ra te (TL to Tp )
3°C/se cond ma x.
Time Ma inta ine d Above:
--Tempera ture (TL)/Time (TL)
217°C/60 ~ 150 s econds
Pe ak Temperature (Tp)
250°C max. for 10 s e conds
Targe t P ea k Tempe ra ture (Tp Targe t)
250°C +0/-5°C
Time within 5°C of actua l pea k (tp)
20 ~ 40 se conds
Ra mp-down Rate
6°C/se cond ma x.
Tune 25°C to Pe ak Temperature (t)
8 minute s ma x.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.12.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com