SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR AP2S Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive -MSL = N/A: Not Applicable FEATURES: • Per formance comparable to fixed frequency oscillator • Lowest peak-to-peak jitter • Low supply current • Short lead time • Suitable for mass production • Alternative to long lead-time XO's ELECTRICAL SPECIFICATIONS: Parameters Frequency Range Minimum Typical Maximum Vdd = 3.3V Vdd = 2.5V Vdd = 1.8V 1 1 11 ------------- 200 166 110 Vdd = 1.8V 1 Operating Temperature Storage Temperature Overall Frequency Stability* Vdd = 3.3V Supply Voltage (Vdd) Vdd = 2.5V Vdd = 1.8V Vdd = 3.3V Input Current Vdd = 2.5V Vdd = 1.8V Symmetry**** Vdd = 3.3V Rise and Fall Time (Tr/Tf)** Vdd = 2.5V Vdd = 1.8V Output Load: ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CE RTIFIED Pb RoHS Compliant ----- -10 -----55 -----100 ----2.97 3.30 2.25 2.50 1.62 1.80 ------------------------------------------------------------------------------------------------45 50 --------(Left blank if standard) ------------------------------------------------- 10 15 20 22 25 8 10 15 15 6 8 2 55 3 2 4 3 5 4 15 | | | | | | | | | | | | | For Small Quantities, Delivery Time is 1-5 days Units MHz 10.999 +60 +150 +100 3.63 2.75 1.98 2.5 x 2.0 x 0.9mm °C °C ppm V Notes In-house programming small quantity only (< 1,000pcs) Contact Abracon for mass production quantity See options See options Standard Vdd option 1 Vdd option 2 1MHz ≤ F< 30MHz 30MHz ≤ F< 75MHz 75MHz ≤ F< 133MHz 133MHz ≤ F < 166MHz 166MHz ≤ F < 200MHz mA 1MHz ≤ F< 30MHz 30MHz ≤ F< 75MHz 75MHz ≤ F< 133MHz 133MHz ≤ F < 166MHz 1MHz ≤ F< 30MHz 30MHz ≤ F< 75MHz 75MHz ≤ F< 133MHz % ns pF @ 1/2Vdd 1MHz ≤ F < 10MHz 10MHz ≤ F 1MHz ≤ F < 10MHz 10MHz ≤ F 1MHz ≤ F < 10MHz 10MHz ≤ F CMOS Revised: 09.16.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | | SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR AP2S Pb RoHS Compliant 2.5 x 2.0 x 0.9mm | | | | | | | | | | | | | ELECTRICAL SPECIFICATIONS: Parameters Output Voltage Minimum Typical Maximum VOL ----- ----- 0.33 VOH 2.97 ----- ----- VOL ----- ----- 0.25 VOH 2.25 ----- ----- VOL ----- ----- 0.18 VOH 1.62 ----- ----- Start-up Time Tri-state function (Stand-by) Standby current --------2.0 "1" (VIH > 0.7*Vdd) or Open: Oscillation "0" (VIH < 0.3*Vdd) : Disable --------15 Units Notes Vdd = 3.3V V Vdd = 2.5V Vdd = 1.8V ms ----uA ----- ----- 40 ps Standard frequencies*** (Reference only. Please contact Abracon for each frequencies.): ----- ----- 200 ps Other frequencies Reference only Please contact Abracon Aging: -3.0 ----- +3.0 ppm Period jitter Peak to Peak @+25°C First year * Inclusive of calibration @25°C, operating temperature range, input voltage variation, load variation, aging, shock, and vibration. For ±20ppm, inclusive of calibration @25°C, operating temperature range, load variation, shock, and vibration. ** Transition times are measured between 10% and 90% of Vdd with an output load of 15 pF. *** 4.0, 6.0, 8.0, 12.0, 13.0, 16.0 19.2, 20.0, 24.0, 26.0, 32.0, 38.4, and 40.0MHz **** Only 40/60% is available for certain frequencies. Please contact Abracon when ordering. TEST CIRCUIT: ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CE RTIFIED Revised: 09.16.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | | SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR AP2S Pb RoHS Compliant 2.5 x 2.0 x 0.9mm | | | | | | | | | | | | | OPTIONS & PART IDENTIFICATION: AP2S Supply Voltage *Blank: 3.3V 1: 2.5V 2: 1.8V Frequency in MHz Please specify the frequency in MHz. e.g. 14.31818MHz Operating Temp. I: 0°C ~ +50°C E: -20°C ~ +70°C F: -30°C ~ +70°C N: -30°C ~ +85°C L: -40°C ~ +85°C MHz - - Overall Freq. Stability J(****): ±20ppm R: ±25ppm K: ±30ppm C: ±50ppm Tri-state pin **Blank: OE ***B: Power Down Packaging Blank: Bulk T: Tape & Reel (1k/reel) T3: Tape & Reel (3k/reel) * 3.3V is standard ** OE: Tri-state the output buffer *** PDB: Tri-state the output buffer and shut off the oscillator, <10µA when PDB enabled. **** Available for -10 to +60°C, I, or E temp options only. Contact ABRACON for EJ or LR options. (Availability limited) OUTLINE DRAWING: Pin 1 2 3 4 Function Tri-State GND/Case Output Vdd Note: Recommend using an approximately 0.01uF bypass capacitor between PIN 2 and 4. Dimensions: inches (mm) ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CE RTIFIED Revised: 09.16.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | | SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR AP2S Pb RoHS Compliant 2.5 x 2.0 x 0.9mm | | | | | | | | | | | | | REFLOW PROFILE TAPE & REEL: T= Tape and reel (1,000pcs/reel) T3= Tape and reel (3,000pcs/reel) Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CE RTIFIED Revised: 09.16.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | |