High Performance, Programmable LVCMOS SMD MEMS

High Performance, Programmable LVCMOS SMD MEMS Oscillator
ASTMUPC
Moisture Sensitivity Level (MSL) – 1
Pb
ESD Sensitive
FEATURES:
RoHS/RoHS II compliant
ASTMUPC
2.7 x 2.4 x 0.75mm; 3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm
APPLICATIONS:
• Ethernet, SATA, SAS, PCI Express
• Industry Standard package sizes: 2.7 x 2.4 x 0.75mm (compatible with 2520
package footprint), 3.2 x 2.5 x 0.75mm, 5 x 3.2 x 0.75mm, 7.0 x 5.0 x 0.9mm • WiFi
• Video
• Any frequency between 1MHz and 220MHz
• Computing
• Supply Voltage options: 3.3V, 2.8V, 2.5V, 1.8V
• Storage
• Ultra-low RMS phase jitter: 0.5ps typ. (@156.25MHz,
• Networking
integration bandwidth: 12kHz to 20MHz)
• Telecom
• Frequency Stability options: ±10ppm, ±20ppm, ±25ppm,
• Industrial control
±50ppm over -20 to +70°C and -40 to +85°C
• Harsh environment (vibration, shock-prone and humid)
• Factory programmable drive strength (for 1MHz ~80MHz) for
improved jitter, reduced EMI or higher capacitive output load
• High Performance MEMS Technology by SiTime
STANDARD SPECIFICATIONS:
All electrical specifications in this table are specified with 15pF output load and for all Vdd options unless otherwise stated.
Parameters
Min
Output Frequency Range (F)
Frequency Stability (Fstab)
Operating Temperature Range (Tuse)
[email protected]°C
st
1 year
10 years
Supply Voltage (Vdd)
Current Consumption ( Idd )
1
-10
-20
-25
-50
-20
-40
-1.5
-5
1.71
2.25
2.52
2.97
Typ
Max
Unit
MHz
1.8
2.5
2.8
3.3
220
+10
+20
+25
+50
+70
+85
+1.5
+5
1.89
2.75
3.08
3.63
31
33
29
31
34
36
30
33
No load, F=20MHz, Vdd=2.5V, 2.8V,
3.3V
No load, F=20MHz, Vdd=1.8V
No load, F=100MHz, Vdd=2.5V, 2.8V,
3.3V
No load, F=100MHz, Vdd=1.8V
31
Vdd=2.5V, 2.8V, 3.3V, OE=GND, output
is weakly pulled down
OE Disable Current (IOD)
30
70
Standby Current (Istd)
Startup Time (Tstart)
10
7
10
150
OE Enable/Disable Time (Toe)
Resume Time ( Tresume)
ABRACON IS
ISO9001:2008
CE RTIFIED
115
6
10
LLC
ppm
°C
Notes
Inclusive of initial tolerance at 25°C,
and variations over operating
temperature, rated power supply
voltage and load (15pF±10%)
Option “E”
Option “L”
ppm
Option “18”
V
Option “25”
Option “28”
Option “33”
mA
mA
µA
ms
ns
ms
Vdd=1.8V, OE=GND, output is weakly
pulled down
Vdd=2.5V, 2.8V, 3.3V, ST =GND, output
is weakly pulled down
Vdd=1.8V, ST=GND, output is weakly
pulled down
Measured from the time Vdd reaches its
rated minimum value
F=80MHz. For other frequencies,
Toe=100ns+3*cycles
F=220MHz. For other frequencies,
Toe=100ns+3*cycles
In standby mode. Measured from the
time ST pin crosses 50% threshold
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
High Performance, Programmable LVCMOS SMD MEMS Oscillator
ASTMUPC
Pb
RoHS/RoHS II compliant
(Continued)
Parameters
Min
Typ
Output Type
Max
Unit
ASTMUPC
2.7 x 2.4 x 0.75mm; 3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm
Notes
LVCMOS
45
40
Duty Cycle
Rise/Fall Time ( Tr /Tf)
55
60
2
1.2
Output High Voltage (VOH)
ns
90%*Vdd
V
Output Low Voltage (VOL)
Input High Voltage(VIH)
Input Low Voltage(VIL)
10%*Vdd
V
30%*Vdd
V
V
250
kΩ
70%*Vdd
Input Pull-up Impedance ( Zin)
F≤165MHz. All Vdd options
F>165MHz. All Vdd options
15pF load, 10%-90%
IOH=-6mA (Vdd=3.3V, 2.8V, 2.5V)
IOH=-3mA (Vdd=1.8V)
IOL=6mA (Vdd=3.3V, 2.8V, 2.5V)
IOL=3mA (Vdd=1.8V)
%
100
2
Pin 1
Pin 1
Pin 1, OE logic high or logic low,
ST logic high
MΩ
RMS Period Jitter ( Tjitt)
RMS Phase Jitter (random) ( Tphj)
1.5
2
2
3
0.5
1
Pin 1, ST logic low
ps
F=75MHz, 156.25MHz, Vdd=2.5V, 2.8V,
3.3V
ps
F=10MHz, 156.25MHz, integration
bandwidth=12kHz to 20MHz
F=75MHz, 156.25MHz, Vdd=1.8V
Absolute Maximum Ratings
Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual
performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings.
Parameters
Storage Te mperature
VDD
Electrostatic Discharge (HBM)
Soldering Temperature
(follow standard Pb free soldering guidelines)
Junction Temperature
Min.
-65
-0 . 5
Max.
150
4
2000
Unit
°C
V
V
260
°C
150
°C
Thermal Consideration
Package
7.0 x 5.0mm
5.0 x 3.2mm
3.2 x 2.5mm
2.7 x 2.4mm (1)
θJA, 4 Layer Board
(°C/W)
191
97
109
117
θJA, 2 Layer Board
(°C/W)
263
199
212
222
θJC, Bottom
(°C/W)
30
24
27
26
Note : 1. The 2.7 x 2.4mm Package is compatible with 2.5 x 2.0mm footprint.
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
High Performance, Programmable LVCMOS SMD MEMS Oscillator
ASTMUPC
Pb
RoHS/RoHS II compliant
ASTMUPC
2.7 x 2.4 x 0.75mm; 3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm
PART IDENTIFICATION:
ASTMUPC -
Package Size
D: 2.7x2.4mm*
E: 3.2x2.5mm
FL: 5.0x3.2mm
V: 7.0x5.0mm
* Compatible with
2.5 x 2.0mm
footprint
-
Output Frequency
in MHz
e.g. 7.3728,
125.000
Supply Voltage
18: 1.8V±10%
25: 2.5V±10%
28: 2.8V±10%
33: 3.3V±10%
MHz-
ABRACON IS
ISO9001:2008
CE RTIFIED
-
Pin 1 Function
E: Output Enable
S: Standby
Operating Temp.
E: -20°C ~ +70°C
L: -40°C ~ +85°C
Freq. Stability
Y: ±10ppm
J: ±20ppm
R: ±25 ppm
C: ±50 ppm
Table 1: Vdd=1.8V Rise/Fall Times for Specific CLOAD
Rise/Fall Time Typ. (ns)
Drive
CLOAD
Strength
5pF
15pF
30pF
45pF
60pF
Options
12.45
17.68
19.48
46.21
57.82
L
6.50
10.27
16.21
23.92
30.73
A
4.38
7.05
11.61
16.17
20.83
R
3.27
5.30
8.89
12.18
15.75
B
2.62
4.25
7.20
9.81
12.65
S
2.19
3.52
6.00
8.31
10.59
D
1.76
3.01
5.14
7.10
9.15
T
1.59
2.59
4.49
6.25
7.98
E
1.49
2.28
3.96
5.55
7.15
U
1.22
2.10
3.57
5.00
6.46
F
1.07
1.88
3.23
4.50
5.87
W
1.01
1.64
2.95
4.12
5.40
G
0.96
1.50
2.74
3.80
4.98
X
0.92
1.41
2.56
3.52
4.64
K
0.88
1.34
2.39
3.25
4.32
Y
0.86
1.29
2.24
3.04
4.06
Q
Z or Blank
0.82
1.24
2.07
2.89
3.82
(default)
0.77
1.20
1.94
2.72
3.61
M
0.66
1.15
1.84
2.58
3.41
N
0.51
1.09
1.76
2.45
3.24
P
-
Packaging
Blank: Bulk
T: Tape & Reel
(1kpcs / reel)
T3: Tape & Reel
(3kpcs / reel)
Output Drive Strength
(for 1MHz ~ 80MHz only)**
Blank: Default
W
L
G
A
X
R
K
B
Y
S
Q
D
Z
T
M
E
N
U
P
F
** See Table 1 to 4 for the Rise/Fall times
(10%~90%) at different drive strength and
available options
Table 2: Vdd=2.5V Rise/Fall Times for Specific CLOAD
Rise/Fall Time Typ. (ns)
Drive
CLOAD
Strength
5pF
15pF
30pF
45pF
60pF
Options
8.68
13.59
18.36
32.70
42.06
L
4.42
7.18
11.93
16.60
21.38
A
2.93
4.78
8.15
11.19
14.59
R
2.21
3.57
6.19
8.55
11.04
B
1.67
2.87
4.94
6.85
8.80
S
1.50
2.33
4.11
5.68
7.33
D
1.06
2.04
3.50
4.84
6.26
T
0.98
1.69
3.03
4.20
5.51
E
0.93
1.48
2.69
3.73
4.92
U
0.90
1.37
2.44
3.34
4.42
F
0.87
1.29
2.21
3.04
4.02
W
G or Blank
0.67
1.20
2.00
2.79
3.69
(default)
0.44
1.10
1.86
2.56
3.43
X
0.38
0.99
1.76
2.37
3.18
K
0.36
0.83
1.66
2.20
2.98
Y
0.34
0.71
1.58
2.07
2.80
Q
0.33
0.65
1.51
1.95
2.65
Z
0.32
0.62
1.44
1.85
2.50
M
0.31
0.59
1.37
1.77
2.39
N
0.30
0.57
1.29
1.70
2.28
P
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
High Performance, Programmable LVCMOS SMD MEMS Oscillator
ASTMUPC
Pb
RoHS/RoHS II compliant
ASTMUPC
2.7 x 2.4 x 0.75mm; 3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm
PART IDENTIFICATION:
Table 3: Vdd=2.8V Rise/Fall Times for Specific CLOAD
Rise/Fall Time Typ. (ns)
Drive
CLOAD
Strength
5pF
15pF
30pF
45pF
60pF
Options
7.93
12.69
17.94
30.10
38.89
L
4.06
6.66
11.04
15.31
19.80
A
2.68
4.40
7.53
10.29
13.37
R
2.00
3.25
5.66
7.84
10.11
B
1.59
2.57
4.54
6.27
8.07
S
1.19
2.14
3.76
5.21
6.72
D
1.00
1.79
3.20
4.43
5.77
T
0.94
1.51
2.78
3.84
5.06
E
0.90
1.38
2.48
3.40
4.50
U
0.87
1.29
2.21
3.03
4.05
F
0.62
1.19
1.99
2.76
3.68
W
G or Blank
0.41
1.08
1.84
2.52
3.36
(default)
0.37
0.96
1.72
2.33
3.15
X
0.35
0.78
1.63
2.15
2.92
K
0.33
0.67
1.54
2.00
2.75
Y
0.32
0.63
1.46
1.89
2.57
Q
0.31
0.60
1.39
1.80
2.43
Z
0.30
0.57
1.31
1.72
2.30
M
0.30
0.56
1.22
1.63
2.22
N
0.29
0.54
1.13
1.55
2.13
P
Table 4: Vdd=3.3V Rise/Fall Times for Specific CLOAD
Rise/Fall Time Typ. (ns)
Drive
CLOAD
Strength
5pF
15pF
30pF
45pF
60pF
Options
7.18
11.59
17.24
27.57
35.57
L
3.61
6.02
10.19
13.98
18.10
A
2.31
3.95
6.88
9.42
12.24
R
1.65
2.92
5.12
7.10
9.17
B
1.43
2.26
4.09
5.66
7.34
S
1.01
1.91
3.38
4.69
6.14
D
0.94
1.51
2.86
3.97
5.25
T
0.90
1.36
2.50
3.46
4.58
E
0.86
1.25
2.21
3.03
4.07
U
F or Blank
0.48
1.15
1.95
2.72
3.65
(default)
0.38
1.04
1.77
2.47
3.31
W
0.36
0.87
1.66
2.23
3.03
G
0.34
0.70
1.56
2.04
2.80
X
0.33
0.63
1.48
1.89
2.61
K
0.32
0.60
1.40
1.79
2.43
Y
0.32
0.58
1.31
1.69
2.28
Q
0.30
0.56
1.22
1.62
2.17
Z
0.30
0.55
1.12
1.54
2.07
M
0.30
0.54
1.02
1.47
1.97
N
0.29
0.52
0.95
1.41
1.90
P
CALCULATING MAXIMUM FREQUENCY
Based on the rise and fall time data given in Table 1 through 4, the maximum frequency the oscillator can operate with
a guaranteed full swing of the output voltage over temperature is calculated as follows:
1
Example:
Calculate Fmax of a 1MHz ~ 80MHz device with the following condition:
• Vdd = 1.8V (Table 1)
• Capacitive Load = 30pF
• Desired Tr/f Time: = 3ns (rise/fall time option code “G”)
The Fmax is 55.5000000MHz.
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
High Performance, Programmable LVCMOS SMD MEMS Oscillator
ASTMUPC
Pb
RoHS/RoHS II compliant
ASTMUPC
2.7 x 2.4 x 0.75mm; 3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm
TYPICAL PHASE NOISE
10MHZ, 3.3V, LVCMOS Output
156.25MHZ, 3.3V, LVCMOS Output
TYPICAL PERFORMANCE DATA
All plots are measured with 15pF load at room temperature, unless otherwise stated.
IDD vs. Frequency
1MHz-80MHz Devices
80.000001MHz -220MHz Devices
RMS Period Jitter vs. Frequency
1MHz-80MHz Devices
ABRACON IS
ISO9001:2008
CE RTIFIED
80.000001MHz -220MHz Devices
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
High Performance, Programmable LVCMOS SMD MEMS Oscillator
ASTMUPC
Pb
RoHS/RoHS II compliant
ASTMUPC
2.7 x 2.4 x 0.75mm; 3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm
TYPICAL PERFORMANCE DATA
Duty Cycle vs. Frequency
1MHz-80MHz Devices
80.000001MHz -220MHz Devices
RMS Phase Jitter vs. Frequency
1MHz-80MHz Devices
ABRACON IS
ISO9001:2008
CE RTIFIED
80.000001MHz -220MHz Devices
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
High Performance, Programmable LVCMOS SMD MEMS Oscillator
ASTMUPC
Pb
RoHS/RoHS II compliant
ASTMUPC
2.7 x 2.4 x 0.75mm; 3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm
TYPICAL PERFORMANCE DATA
IDD vs. Temperature
10MHz Devices
100MHz Devices
Rise Time vs. Temperature
75MHz Devices
ABRACON IS
ISO9001:2008
CE RTIFIED
100MHz Devices
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
High Performance, Programmable LVCMOS SMD MEMS Oscillator
ASTMUPC
Pb
RoHS/RoHS II compliant
ASTMUPC
2.7 x 2.4 x 0.75mm; 3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm
OUTLINE DIMENSION:
2.7 x 2.4mm Package (Option “D”, compatible with 2.5 x 2.0mm footprint)
Recommended Land Pattern
3.2 x 2.5mm Package (Option “E”)
Recommended Land Pattern
5.0 x 3.2mm Package (Option “FL”)
Recommended Land Pattern
Dimensions: mm
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
High Performance, Programmable LVCMOS SMD MEMS Oscillator
ASTMUPC
Pb
RoHS/RoHS II compliant
ASTMUPC
2.7 x 2.4 x 0.75mm; 3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm
OUTLINE DIMENSION:
7.0 x 5.0mm Package (Option “V”)
Recommended Land Pattern
Pin
Name
Output Enable
1
OE/ST
2
3
4
GND
Out
Vdd
Standby
Power
Output
Power
Functionality
H or Open (1): specified frequency output
L: output is high impedance. Only output driver is disabled
H or Open (1): specified frequency output
L: output is low (weak pull down). Device goes to sleep
mode. Supply current reduces to Istd.
Electrical ground (2)
Oscillator clock output
Power supply voltage (2)
Notes: 1. A pull-up resistor of <10kΩ between OE/ST pin and Vdd is recommended in high noise environment.
2. A capacitor value of 0.1µF between Vdd and GND is recommended.
Dimensions: mm
REFLOW PROFILE:
Item
TS MAX to TL (Ramp-up Rate)
Conditions
3°C/second max
Preheat
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
Temperature Minimum (TS MIN)
150°C
Temperature Typical (TS TYP)
175°C
Temperature Maximum (TS MAX)
200°C
Time (tS)
60 – 180 seconds
Ramp-up Rate (TL to TP)
3°C/second max
Time Maintained Above
Temperature (TL)
217°C
Time (tL)
60 – 150 seconds
Peak Temperature (TP)
260°C max
Target Peak Temperature (TP Target)
255°C
Time within 5°C of actual peak (tP)
20 – 40 seconds
Max. Number of Reflow Cycles
3
Ramp-down Rate
6°C/second max
Time 25°C to Peak Temperature (t)
8 minutes max
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
High Performance, Programmable LVCMOS SMD MEMS Oscillator
ASTMUPC
Pb
RoHS/RoHS II compliant
ASTMUPC
2.7 x 2.4 x 0.75mm; 3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm; 7.0 x 5.0 x 0.9mm
TAPE & REEL:
Device Size
2724
3225
5032
7050
D0
1.55±0.05
1.5+0.1/0.0
1.5+0.1/0.0
1.5+0.1/0.0
D1 min.
1.0
E1
1.75±0.1
E2 min.
9.85
F
5.5±0.05
P0
4.0±0.1
Unit: mm
P1
P2
4.0±0.1
2.0±0.05
1.5
1.75±0.1
10.25
5.5±0.05
4.0±0.1
4.0±0.1
2.0±0.05
1.5
1.75±0.1
10.25
5.5±0.05
4.0±0.1
8.0±0.1
2.0±0.05
1.5
1.75±0.1
14.25
7.5±0.1
4.0±0.1
8.0±0.1
2.0±0.1
Device Size
2724
3225
5032
7050
T
0.3±0.05
0.6
0.6
0.6
T1 max.
0.1
0.1
0.1
0.1
Tape Size
A max.
180
330
180
330
B min.
1.5
1.5
1.5
1.5
12mm
16mm
Device Size
2724
3225
5032
7050
T2 max.
1.55
1.65
1.65
1.80
C
13.0±0.2
13.0±0.2
13.0±0.2
13.0±0.2
W max.
12.3
12.3
12.3
16.3
D min.
20.2
20.2
20.2
20.2
“T” (1k/reel)
12mm Tape
7” Reel
12mm Tape
7” Reel
12mm Tape
7” Reel
16mm Tape
7” Reel
A0
2.65±0.10
2.8±0.10
3.5±0.10
5.4±0.10
B0
2.95±0.10
3.5±0.10
5.3±0.10
7.4±0.10
N
60±0.5
100±0.5
60±0.5
100±0.5
Unit: mm
K0
1.00±0.10
1.10±0.10
1.10±0.10
1.3±0.10
Unit: mm
W1
W2 max.
12.4+2.0/-0
18.4
12.4+2.0/-0
18.4
16.4+2.0/-0
22.4
16.4+2.0/-0
22.4
“T3” (3k/reel)
12mm Tape
7” Reel
12mm Tape
7” Reel
12mm Tape
13” Reel
16mm Tape
13” Reel
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale