4.5 x 2.0 x 1.2 mm INDUSTRIAL GRADE BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-CR RoHS/RoHS II Compliant Moisture Sensitivity Level (MSL) – This product is not Moisture Sensitive - MSL= 1 FEATURES: • Low resonant impedance • Built-in load capacitors • IR reflow capable Pb in ceramic, exemption (7c-I) APPLICATIONS: • Remote controls, Microprocessor clocks, DVD & CD-ROMs, Electric appliances • Consumer electronics 4.5 x 2.0 x 1.2mm | | | | | | | | | | | | | | STANDARD SPECIFICATIONS: Parameters Frequency Range Resonant Impedance (Ro) Minimum 4.00 Typical Maximum 8.00 40 Units MHz Ω Built-In Load Capacitance (C1=C2) 12 15 18 pF Frequency Tolerance @25 ºC Frequency Stability (-25ºC to +85ºC) -0.5 -0.3 +0.5 +0.3 % % V +6 15 V Vp-p. Withstanding Voltage (1) D.C.Voltage Rating Voltage (2) A.C. Voltage Insulation Resistance Operation Temperature Storage Temperature Aging Rate (Fosc) (10 years) 100 -25 -55 -0.2 50 +85 +85 +0.2 MΩ ºC ºC % Notes DC , 1 min 10V, 1min TEST CIRCUIT: X: Ceramic Resonator C1=C2: 15pF ±20% 1: INPUT 2: GROUND 3: OUTPUT Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp 25±3°C, Humidity: 65±10% R.H.) is regulated to test. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 04.06.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | 4.5 x 2.0 x 1.2 mm INDUSTRIAL GRADE BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-CR RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) 4.5 x 2.0 x 1.2mm | | | | | | | | | | | | | | PART IDENTIFICATION: Load Capacitance Frequency Contact ABRACON for Load Capacitance options Frequency in MHz Packaging T: 3000pcs/Reel OUTLINE DIMENSION: Recommended Land Pattern 0.8 0.8 2.6±0.2 2.0±0.1 0.8 1.2max 0.8±0.1 0.8±0.1 0.8±0.1 1.5±0.1 1.5 1.5 0.75±0.1 1.5±0.1 * ：EIAJ MONTHLY CODE Dimension: mm REFLOW PROFILE: Peak:260℃max 10s max 250℃ 230℃ 150℃ Pre-heating 100℃ 30s min ABRACON IS ISO9001:2008 CE RTIFIED within 80-120s. within 20-40s Revised: 04.06.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | 4.5 x 2.0 x 1.2 mm INDUSTRIAL GRADE BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-CR RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) 4.5 x 2.0 x 1.2mm | | | | | | | | | | | | | | | TAPE & REEL: T: 3000pcs/Reel Top Tape - 70g ength 20 Peeling Str 10 max Carrier Tape ФA 180±3 ФB 60 min. W 12.4 min T 19.4 max Pieces per reel 3000 typ. Carrier tape size 12 Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the product will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according to MSL 1 requirements to maintain solderability Dimensions: mm CAUTION (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than Six Months after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-reliability, life dependant applications. Contact Abracon Corporation prior to using this product when in doubt. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Application Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where componen failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 04.06.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com