ULTRA MINIATURE CERAMIC GLASS SEALED SMD CRYSTAL ABM8G Pb in glass exemption 7 (c)-I per RoHS/RoHS II Compliant RoHS II 2011/65/EU Annex 3.2 x 2.5 x 1.0mm Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: APPLICATIONS: • Low in height; suitable for thin equipment • Glass sealed package assures high reliability and high temperature operation • Tight tolerance and stability available • IR reflow capable • Low cost version of ABM8 crystal STANDARD SPECIFICATIONS: Parameters • High density applications. • Modems, communication and test equipment. • PMCIA, wireless applications Minimum Frequency Range O p e r a t i on M o d e Operating Temperature Storage Temperature Frequency Tolerance @+25°C Typical Maximum Units 50.000 MHz -10 -40 -50 +60 +85 +50 ºC ºC ppm See options -50 +50 ppm See options Ω 12.000MHz 12.001MHz ~ 20.000MHz 20.001MHz ~ 28.000MHz 28.001MHz ~ 50.000MHz 12.000 Notes Fundamental Frequency Stability over the Operating Temperature ( ref. to +25°C) 120 80 60 50 5.0 Equivalent series resistance Shunt capacitance (C0) Load capacita nce (CL) Drive Level Aging@25°C±3°C Insulation Resistance 10 10 See options pF pF µW ppm MΩ 100 ±3 500 See options First year @ 100Vdc ± 15V OPTIONS & PART IDENTIFICATION: (Left blank if standard) ABM8G - MHz - - - - Packaging Blank: Bulk T: Tape & Reel (1k pcs /reel) T3: Tape & Reel (3k pcs /reel) Frequency in MHz Please specify the frequency in MHz. e.g. 14.31818MHz Load Capacitance (pF) Please specify CL in pF or S for series. (Minimum 7pF) Please contact Abracon for values under 10pF - Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) Operating Temp. Freq. Tolerance E: 0°C ~ +70°C B: -20°C ~ +70°C C: -30°C ~ +70°C N: -30°C ~ +85°C D: -40°C ~ +85°C 1: ± 10 ppm 7: ± 15 ppm 2: ± 20 ppm 3: ± 25 ppm 4: ± 30 ppm Freq. Stability U*: ± 10 ppm G**: ± 15 ppm X: ± 20 ppm W: ± 25 ppm Y: ± 30 ppm H: ± 35 ppm Q: ± 100 ppm * -10 ~ 60°C only. Contact Abracon for tighter freq. stability. ** -10 ~ 60°C option E, B, C, N only. ABRACON IS ISO 9001 : 2008 ISO 9001 / QS 9000 CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.13.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale ULTRA MINIATURE CERAMIC GLASS SEALED SMD CRYSTAL ABM8G Pb in glass exemption 7 (c)-I per RoHS/RoHS II Compliant RoHS II 2011/65/EU Annex 3.2 x 2.5 x 1.0mm OUTLINE DRAWING: Note: Due to the availability of raw materials, this part may be manufactured with the chamfer on pin 4. Be advised that this does not affect the electrical characteristics of the crystal in any way. Per the Top Marking from left to right, Pin 1 is always located on the bottom left. Dimensions: Inch (mm) TAPE & REEL: REFLOW PROFILE: Tape and reel (1,000pcs/reel) Tape and reel (3,000pcs/reel) Dimensions: mm Need a test socket for the ABM8G Series? To view compatible PRECISION TEST & BURN-IN SOCKETS for these parts, click here. ABRACON IS ISO 9001 : 2008 ISO 9001 / QS 9000 CE RTIFIED ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any applicationrequiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.13.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale