GPS Active Antenna Module APAMPJ-132 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) ESD Sensitive MSL level: Not Applicable FEATURES: • GPS External Module 1575.42MHz • Compact design 41 x 34 x 14.5mm • Patch with low gain LNA • Low gain to reduce chance of saturation of RFIC • Gain (12dBm min / 16dBm max) • Out of band rejection 49dB min • DC Supply (2.7V min / 5.5V max) • Easy to install (adhesive tape base) • RoHS/RoHS II compliant • 2J Technology 41.0 X 34.0 X 14.5mm TYPICAL APPLICATIONS: • Automotive Navigation • Tracking Systems • GPS Navigation in urban canyons STANDARD SPECIFICATIONS: Antenna Parameters Center Frequency Bandwidth VSWR at Center Frequency Polarization Model Impedance Gain (Zenith) Low Noise Amplifier (LNA) Parameters Center Frequency DC Voltage Gain Out-of-band Rejection (Absolute Value) Output VSWR Noise Figure DC current Power Min. Typ. 1575.42 10 ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Units MHz MHz Note 1.5:1 (Right Hand Circular Polarization) RHCP 50 4.0 Min. 2.7 12 49 21 15 Typ. 1575.42 14 1.15 Overall (complete module including RF connector) Parameters Center Frequency Gain Output VSWR Impedance Operating Temperature Max. Min. 12 -40 Typ. 1575.42 14 50 Ω dBic Max. 5.5 16 2:1 1.8 25 138 Max. 16 2:1 +85 LLC (Based on 70× 70mm ground plane) Units MHz Note dB dB dB (Without cable +25°C± 10°C) (fo+100MHz) (fo-100MHz) V mA mW Units MHz dBic Note (Based on 70x70mm ground plane.) Ω ˚C 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.28.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale GPS Active Antenna Module APAMPJ-132 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 41.0 X 34.0 X 14.5mm ANTENNA’S IMPEDANCE AND RETURN-LOSS CHARACTERISTICS ANTENNA S21 GAIN OUTLINE DRAWING: Side View Top View Parameters L (Cable Length) Antenna RF Cable Attenuation RF Cable PCB RF Connector Housing Mounting Description 500±5cm Dielectric Ceramic 1.3 dB/m Coax. cable RG174U FR4 MMCX, Male, Straight, Nickel Black ABS Adhesive Tape Unit:mm ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.28.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale GPS Active Antenna Module APAMPJ-132 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 41.0 X 34.0 X 14.5mm PACKAGING: Antenna is packaged in 100x200x0.1mm size poly bag. There are 300pcs in 465x310x250mm size box. CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to them. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please evaluate your specifications before mounting this product. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.28.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale