Ceramic Wire Wound Inductors AISC-1206 Pb FEATURES: • Exceptionally high Q compared to non-wirewound inductor, especially at high frequencies • Inductance values available from 3.3 nH to 1200nH RoHS/RoHS II Compliant 3.56 x 2.16 x 1.52mm APPLICATIONS: • Widely applied in the VCO, SAW circuit for GSM, CDMA Communications • Bluetooth, W-LAN • Used in hard disk, notebook computer and other electronic equipment STANDARD SPECIFICATIONS: Part Number AISC-1206Inductance Code Units Symbol AISC-1206-3N3 AISC-1206-6N8 AISC-1206-10N AISC-1206-12N AISC-1206-15N AISC-1206-18N AISC-1206-22N AISC-1206-27N AISC-1206-33N AISC-1206-39N AISC-1206-47N AISC-1206-56N AISC-1206-68N AISC-1206-82N AISC-1206-R10 AISC-1206-R12 AISC-1206-R15 AISC-1206-R18 AISC-1206-R22 AISC-1206-R27 AISC-1206-R33 AISC-1206-R39 AISC-1206-R47 AISC-1206-R56 AISC-1206-R68 AISC-1206-R82 AISC-1206-1R0 AISC-1206-1R2 ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Inductance Tolerance nH L 3.3 6.8 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 J, K J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K Min. Quality Factor Q 20 30 40 40 40 45 50 50 50 50 50 55 55 55 55 60 55 60 60 50 45 45 45 45 45 45 45 45 L/Q Test Freq. Max. DC Resistance Max. Rated Current Min. Self-resonant Frequency MHz Freq. 100/300 100/300 100/300 100/300 100/300 100/300 100/300 100/300 100/300 100/300 100/300 100/300 100/300 100/300 100/300 100/300 100/300 50/300 50/300 50/300 50/150 50/150 50/150 35/150 35/150 35/150 35/150 35/150 Ω DCR 0.07 0.07 0.09 0.09 0.12 0.12 0.12 0.12 0.12 0.12 0.13 0.14 0.26 0.21 0.30 0.30 0.31 0.43 0.56 0.56 0.70 0.80 1.30 1.34 1.58 1.82 2.80 3.20 mA Ir 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 900 900 850 800 750 700 670 630 590 530 490 460 430 400 320 300 MHz S.R.F 6200 5500 4000 3200 3200 2800 2200 1800 1800 1800 1500 1450 1200 1200 1100 1100 950 900 760 730 650 600 550 470 450 420 400 380 Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.11.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Ceramic Wire Wound Inductors AISC-1206 Pb RoHS/RoHS II Compliant 3.56 x 2.16 x 1.52mm Test Equipment Inductance (L): Agilent4287A+Agilent16197A or equivalent, -13dBm or 10mA Direct Current Resistance (DCR): HIOKI 3540 or equivalent Q Factor (Q): Agilent4287A+Agilent16197A or equivalent, -13dBm or 10mA Self-Resonant Frequency (SRF): Agilent4991B+Agilent16197A and HP 8753E or equivalent, -20dBm or 50mV Rated Current (Ir): Ir is direct electric current as chip surface temperature rose just 20oC against chip initial surface temperature (Ta) Operating Temperature: -40ºC to +125ºC Storage Temperature: -10ºC to +40ºC, 70% RH max. ELECTRICAL CHARACTERISTICS CURVES AISC-1206-6N8 AISC-1206-47N AISC-1206-R18 AISC-1206-6N8 AISC-1206-47N AISC-1206-R18 PART NUMBER IDENTIFICATION AISC-1206 - Inductance Code Please refer to the table - Tolerance Code Packaging G: ±2% T: Tape & Reel (2k/reel) J: ±5% K: ±10% ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.11.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Ceramic Wire Wound Inductors AISC-1206 Pb RoHS/RoHS II Compliant 3.56 x 2.16 x 1.52mm OUTLINE DIMENSIONS: A MAX. 3.56 B MAX. 2.16 C MAX. D REF. E F H REF. I REF. J REF. 1.52 0.51 1.6±0.2 0.5±0.2 1.93 1.02 1.78 Dimension: mm Materials No. A B C D Components Coating Core Wire Electrodes Material Ultraviolet epoxy resin Ceramic Polyurethane system enameled copper wire Mo-Mn with Ni and Au plating REFLOW PROFILE: ∆ 1~2 oC/sec. Ramp ∆ Pre-heating: 150~190oC /90±30 sec. ∆ Time above 240 oC: 20~40sec ∆ Peak temperature: 260 oC Max./10sec; ∆ Solder paste: Sn/3.0Ag/0.5Cu ∆ Max.2 times for Re-flowing ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.11.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Ceramic Wire Wound Inductors AISC-1206 Pb RoHS/RoHS II Compliant 3.56 x 2.16 x 1.52mm TAPE & REEL: T= tape and reel (2,000pcs/reel) A B P K T 2.40±0.2 3.80±0.2 4.0±0.1 1.60±0.3 0.3±0.1 10 ±1.5 4.0±0.1 5.0 ±0.1 3.0 ±0.1 178 ±2 58 ±2 13.5 ±0.2 2.45 ±0.2 Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.11.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com