Wire Wound Common Mode Choke for HDMI ACM-21H Pb RoHS/RoHS II compliant 2.0 x 1.2 x 1.2mm | | | | | | | | | | | | | | APPLICATIONS: FEATURES: • Small size and low profile • Virtually no effect on high speed signals due to suppressed differential mode impedance • Elimination of common mode noise in high speed, differential mode signal transmission lines such as HDMI • HDMI, DVI, etc STANDARD SPECIFICATIONS Abracon P/N: Operating Temperature & Humidity: Storage Temperature & Humidity: Part Number ACM-21H -40˚C to +85˚C -10˚C to +40˚C, Humidity < 70%RH (In tape and reel) Impedance @100MHz DCR IR Rated Voltage Insulation Resistance Vdc MΩ (min.) Units Ω ± 25% Ω (max.) mA ACM-21H-670 67 0.30 320 20 10 ACM-21H-900 90 0.40 280 20 10 ACM-21H-121 120 0.40 280 20 10 Test Conditions Impedance (Common mode and differential mode): LCR Meter Agilent 4287A/E4991A DCR: Agilent 4338B/34420 IR: Electric power, Electrical current meter, Thermometer Definition of Rated Current (IR): The direct electric current as chip surface temperature rise just 20oC against chip initial surface temperature. Insertion Loss: Network Analyzer Agilent E5071C Insulation Resistance: High resistance meter Agilent 4339B PART IDENTIFICATION: ACM-21H- Impedance Code Please refer to the table above ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CE RTIFIED - Packaging Blank: bulk T: Tape and Reel (2k pcs/reel) Revised: 02.19.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | Wire Wound Common Mode Choke for HDMI ACM-21H Pb RoHS/RoHS II compliant 2.0 x 1.2 x 1.2mm | | | | | | | | | | | | | | ELECTRICAL CHARACTERISTIC CURVE: ACM-21H-670 ACM-21H-121 ACM-21H-900 ACM-21H-900 ACM-21H-121 ACM-21H-670 ACM-21H-121 ACM-21H-900 ACM-21H-670 ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CE RTIFIED Revised: 02.19.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | Wire Wound Common Mode Choke for HDMI ACM-21H Pb RoHS/RoHS II compliant 2.0 x 1.2 x 1.2mm | | | | | | | | | | | | | | OUTLINE DIMENSIONS: Recomme nded Land Pattern Sche matic Materials No. Part Name ① Lid ② Epoxy ③ Wire ④ Core Electrode structure ⑤ Material Name Ni-Zn Ferrite Epoxy resin Polyurethane system enameled copper wire Ni-Zn Ferrite (Ag-Pd)+Ni+Sn plating o REFLOW PROFILE: ∆ ∆ ∆ ∆ ∆ ∆ ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CE RTIFIED Preheat condition: 150~200 C/60~120sec. Allowed time above 217C: 60~90sec. Max temp: 260oC Max time at max temp: 10sec. Solder paste: Sn/3.0Ag/0.5Cu Allowed Reflow time: 2 times max. Revised: 02.19.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | Wire Wound Common Mode Choke for HDMI ACM-21H Pb RoHS/RoHS II compliant 2.0 x 1.2 x 1.2mm | | | | | | | | | | | | | | | TAPE & REEL: 2000pcs/reel A B P K T 1.55±0.2 2.25±0.2 4.0±0.1 1.45±0.1 0.2±0.1 Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CE RTIFIED Revised: 02.19.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com