Ultra-Low Phase Jitter LVDS SMD Clock Oscillator ASFLMX-200.000MHz-5ABB Pb ESD Sensitive RoHS/RoHS II compliant Moisture Sensitivity Level – MSL 3 APPLICATIONS: • Communications • Backplane reference clock • SERDES reference clock • FPGA FEATURES: • 200MHz LVDS • Typical phase noise: - 100fs (Integration range: 1.875MHz-20MHz) • ±50ppm total frequency stability over -40°C to +85°C temperature range • Industry standard 6-Pin 5 x 3.2mm LGA package KEY ELECTRICAL SPECIFICATIONS Absolute Maximum Ratings Item Supply Voltage Storage Temp. Lead Temp.(soldering, 10s) ESD (HBM) Minimum -0.3 -55 Maximum +3.6 +125 +260 2 Unit V °C °C kV 5.0 x 3.2 x 1.4mm High Performance Condition VDD = 2.375 - 3.63V, TA = -40°C to +85°C, outputs terminated with 100 Ohms between Q and /Q.(1) Parameters Frequency Operating Temperature (TA) Overall Frequency Stability (2) Supply Voltage (VDD) Supply Current (IDD) Output Logic Level Minimum -40 -50 +2.375 VOH VOL Output Differential Voltage (VOD) Common Mode Output voltage (VCM) Start-up Time Rise Time (Tr) Fall Time (Tf) Duty Cycle Integration Range: 12kHz to 20MHz Phase Noise Integration Range: 1.875MHz to 20MHz Notes: 1. 2. Typical 200.000 1.248 0.898 247 1.125 1.375 1.025 350 1.2 100 100 45 Maximum +85 +50 +3.63 90 1.602 1.252 454 1.375 20 400 400 55 220 Units MHz °C ppm V mA V V mV V ms ps % Notes VOH max= VCM max+1/2 VOD max VOL min= VCM min-1/2 VOD max RL=100Ω , CL=0pF 20% to 80% fsRMS 100 Guaranteed after thermal equilibrium Inclusive of initial accuracy, temperature drift, aging, shock, vibration from -40°C to +85°C. PART IDENTIFICATION ASFLMX-200.000MHz -5ABB Packing Blank: Bulk or Tube T: Tape & Reel (1k/reel) ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.08.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Ultra-Low Phase Jitter LVDS SMD Clock Oscillator ASFLMX-200.000MHz-5ABB OUTLINE DIMENSION Ref. A A1 A2 D D1 E E1 b c e f k m n Min. 1.260 0.190 1.070 3.100 4.900 0.850 0.850 0.050 0.860 0.580 Nom. 1.330 0.230 1.100 3.200 2.100 BSC 5.000 2.540 BSC 0.900 0.900 1.270 BSC 0.100 0.910 0.630 6 Pb DESCRIPTION: Max. 1.400 0.270 1.130 3.300 RoHS/RoHS II compliant ASVMP 5.0 x 3.2 x 1.4mm Low Jitter High Performance Dimensional Tolerance aaa 0.100 bbb 0.070 Recommended Land Pattern 5.100 0.950 0.950 0.150 0.960 0.680 Dimensions: mm ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.08.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Ultra-Low Phase Jitter LVDS SMD Clock Oscillator ASFLMX-200.000MHz-5ABB Pb RoHS/RoHS II compliant DESCRIPTION: PIN CONFIGURATION Pin # Pin Name Pin Type Pin Level 1 OE I, SE LVCMOS 2 3 4 5 6 DNC GND Q /Q VDD PWR O O PWR LVDS LVDS ASVMP 5.0 x 3.2 x 1.4mm Low Jitter High Performance Pin Function Output Enable, disables output to tri-state. 0 = Disabled, 1= Enabled, 50k Ω Pull-up Make no connection, leave floating Power Supply Ground Clock Output Complimentary Clock Output Power Supply REFLOW PROFILE Parameters Average Ramp-up Rate Pre-Heat Temp 150 – 200°C Temp > 217°C Time @ Peak Temperature Peak Temperature Ramp-down Rate Time 25°C to Peak Temp. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC Specifications 3°C /second max. 60 – 180 second 60 – 150 second 20 – 40 second 260°C + 0°C / -5°C -6°C / second max. 8 minutes max. 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.08.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Ultra-Low Phase Jitter LVDS SMD Clock Oscillator ASFLMX-200.000MHz-5ABB TAPE & REEL Pb DESCRIPTION: RoHS/RoHS II compliant ASVMP 5.0 x 3.2 x 1.4mm Low Jitter High Performance T= Tape & Reel, 1000pcs/reel. Reel Size = 7-inch Reel MSL-3 packaging applies to –T option. Blank = Bulk or Tube (60pcs/tube) MSL-3 packaging applies to MOQ=60 units (tube) 313.75 ~ 316.25 0.50±0.10 All sides 3.70±0.20 4.70 Ref. 1.80+0.20/-0.10 2.80 Ref. Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.08.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale