SRF1535 THRU SRF15200(SINGLE CHIP)

SRF1535 THRU SRF15200 (SINGLE CHIP)
R
SCHOTTKY BARRIER RECTIFIER
Reverse Voltage - 35 to 200 Volts
Forward Current - 15Amperes
S E M I C O N D U C T O R
FEATURES
ITO-220AC
Plastic package has Underwriters Laboratory Flammability Classification 94V-0
Metal silicon junction ,majority carrier conduction
Guard ring for overvoltage protection
0.187(4.75)
0.167(4.25)
0.140(3.55)
0.410(10.42)
0.388(9.85)
0.128(3.25)
DIA
Low power loss ,high efficiency
0.130(3.31)
0.110(2.81)
0.111(2.83)
High current capability ,Low forward voltage drop
0.101(2.57)
0.272(6.90)
0.256(6.50)
High surge capability
0.610(15.50)
For use in low voltage ,high frequency inverters,
0.571(14.50)
JF
SRF1560
free wheeling ,and polarity protection applications
PIN
1
Dual rectifier construction
2
1.161(29.50)
0.177(4.50)
High temperature soldering guaranteed:260° C/10 seconds,,
0.136(3.45)
1.083(27.50)
0.138(3.50)
0.102(2.60)
0.551(14.00)
0.25"(6.35mm)from case
0.496(12.60)
0.056(1.43)
0.043(1.10)
Component in accordance to RoHS 2002/95/EC and
0.029(0.73)
WEEE 2002/96/EC
0.019(0.47)
0.208(5.28)
MECHANICAL DATA
0.029(0.73)
0.192(4.88)
0.019(0.47)
Case: JEDEC ITO-220AC molded plastic body
Terminals: Lead solderable per MIL-STD-750,method 2026
Polarity: As marked.
Dimensions in inches and (millimeters)
Mounting Position: Any
Weight: 0.08ounce, 2.24 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive
load. For capacitive load, derate by 20%.)
Symbols
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
See Fig.1
Peak forward surge current 8.3ms single half
sine-wave superimposed on rated load
(JEDEC method)
Maximum instantaneous forward voltage
at 15 A
Maximum instantaneous reverse
current at rated DC blocking
voltage(Note 1)
T C =25 C
T C =125 C
100
150
200
42
70
105
140
60
100
150
200
SRF
1550
SRF
1560
35
45
50
60
35
50
25
32
35
45
SRF
15100
Units
Volts
Volts
Volts
I(AV)
15.0
Amps
IFSM
150.0
Amps
VF
IR
R
Operating junction temperature range
TJ
TSTG
Notes: 1.Pulse test: 300
SRF
15200
SRF
1545
VRRM
VRMS
VDC
Typical thermal resistance (Note 2)
Storage temperature range
SRF
15150
SRF
1535
0.60
0.75
0.90
0.85
0.95
Volts
0.2
30
JC
50
mA
3.0
C/W
-65 to+150
C
-65 to+150
C
s pulse width,1% duty cycle
2.Thermal resistance from junction to case
JINAN JINGHENG ELECTRONICS CO., LTD.
1-110
HTTP://WWW.JINGHENGGROUP.COM
RATINGS AND CHARACTERISTIC CURVES SRF1535 THRU SRF15200 (SINGLE CHIP)
FIG.2-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
25
175
RESISTIVE OR INDUCTVE LOAD
20
TJ=TJMAX
150
PEAK FORWARD SURGE
CURRENT(AMPERES)
AVERAGE FORWARD CURRENT
AMPERES
FIG.1-FORWARD CURRENT DERATING CURVE
15
10
5
0
0
50
100
150
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
125
100
75
50
25
LEAD TEMPERATURE ( C)
1
FIG.3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
100
FIG.4-TYPICAL REVERSE CHARACTERISTICS
20
50
SRF1535 – SRF1545
INSTANTANEOUS REVERSE CURRENT (mA)
10
INSTANTANEOUS FORWARD CURRENT( AMPERES)
10
NUMBER OF CYCLES AT 60Hz
10
TJ=125 C
PULSE WIDTH=300 S
1% DUTY CYCLE
TJ=25 C
1
0.1
SRF1550 – SRF1560
TJ=125 C
1
0.1
TJ=75 C
0.01
SRF1535 -- SRF1545
SRF1550 - SRF15200
0.01
TJ=25 C
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
0.001
0
INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE%
FIG.5-TYPICAL JUNCTION CAPACITANCE
FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE
TRANSIENT THERMAL IMPEDANCE, C/ W
JUNCTION CAPACITANCE(pF)
4000
TJ=25 C
f=1.0MHZ
Vsig=50mVp-p
1000
SRF1535 – SRF1545
SRF1550 – SRF15200
100
40
0.1
1
10
10
1
0.1
0.01
100
0.1
1
10
100
T, PULSE DURATION ,sec.
REVERSE VOLTAGE. VOLTS
JINAN JINGHENG ELECTRONICS CO., LTD.
100
1-111
HTTP://WWW.JINGHENGGROUP.COM