FR601 THRU FR607 R FAST RECOVERY RECTIFIER Reverse Voltage: 50 to 1000 Volts Forward Current:6.0Amperes S E M I C O N D U C T O R R-6 FEATURES Low leakage Low forward voltage drop JJF High current capability 1.0(25.4) MIN High current surge High reliability High temperature soldering guaranteed:260°C/10 seconds at terminals Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 0.360(9.1) 0.340(8.6) DIA 0.360(9.1) 0.340(8.6) MECHANICAL DATA 1.0(25.4) MIN Case: R-6 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750,Method 2026 0.052(1.32) 0.048(1.22) DIA Polarity: Color band denotes cathode end Mounting Position: Any Dimensions in inches and (millimeters) Weight: 0.074 OUNCE,2.08 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating at 25 C ambient temperature unless otherwise specified.Single phase ,half wave ,60HZ,resistive or inductive load. For capacitive load,derate current by 20%.) Symbols FR 601 FR 602 FR 603 FR 604 FR 605 FR 606 FR 607 50 100 200 400 600 800 1000 35 70 140 280 420 560 700 50 100 200 400 600 800 1000 Units Volts Volts Volts Maximum DC Blocking Voltage VRRM VRMS VDC Maximum Average Forward Rectified Current 0.375"(9.5mm)lead length at TA=55°C I(AV) 6.0 Amps Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 200 Amps VF 1.2 Volts Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum Instantaneous Forward Voltage at 6.0A Maximum DC Reverse Current at rated DC blocking voltage TA=25°C 10.0 IR A 200 TA=100°C Maximum reverse recovery time(Note1) Typical junction capacitance(Note2) Operating junction and storage temperature range trr CJ 150 TJ TSTG 250 500 ns 100 pF -65 to+150 C Note: 1.Test conditions: IF=0.5A,IR=1.0A,IRR=0.25A. 2.Measured at 1MHZ and applied reverse voltage of 4.0 Volts D.C. JINAN JINGHENG ELECTRONICS CO., LTD. 7-20 HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC CURVES FR601 THRU FR607 FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 8 SINGIE PHASE HAIF WAVE 60HZ PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT (A) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE RESISTIVE OR INDUCTIVE LOAD 6 4 2 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE ( C) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 300 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 250 200 150 100 50 0 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz 500 700 600 500 40 JUNCTION CAPACITANCE(pF) INSTANTANEOUS FORWARD CURRENT(A) FIG.4-TYPICAL JUNCTION CAPACITANCE 100 10 Tj=25°C Pulse Width=300µs 1% Duty Cycle 1 400 300 200 100 60 40 1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2 4 6 10 20 40 REVERSE VOLTAGE (V) 2.0 FORWARD VOLTAGE (V) FIG.5-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC NONINDUCTIVE NONINDUCTIVE trr +0.5A (＋) D.U.T. 0 PULSE GENERATOR (NOTE2) 50Vdc -0.25A (ADJUSTABLE) (－) 1 NONINDUCTIVE OSCILLOSCOPE (NOTE1) -1.0A 1cm SET TIME BASE FOR 50/100 ns/cm NOTES:1.Rise Time=7ns max. input lmpedance=1 megohm 22pF 2.Rise Time=10ns max. source lmpedance= 50 ohms JINAN JINGHENG ELECTRONICS CO., LTD. 7-21 HTTP://WWW.JINGHENGGROUP.COM 60 100