OADM 100 GHz Single Channel Optical Add/Drop Multiplexer Specification Parameter Center Wavelength (λc) ITU Grid Channel Spacing 100 GHz Channel Pass Band ≥ λc ± 0.11 nm Insertion Loss (Express Channel) ≤ 0.5 dB Insertion Loss (Add/Drop Channel) ≤ 0.9 dB Pass Band Ripple ≤ 0.5 dB Adjacent Channel Isolation ≥ 25 dB Non-Adjacent Channel Isolation ≥ 40 dB Express Channel Isolation ≥ 12 dB Directivity ≥ 50 dB Return Loss ≥ 45 dB PDL ≤ 0.1 dB PMD ≤ 0.1 ps Maximum Power 300 mW 0° C to + 65° C Operating Temperature - 40° C ~ + 85° C Storage Temperature Package Dimensions Bare Fiber (B) 5.5 mm (Φ) x 35 mm (L) 900 µm loose tube (L) 5.5 mm (Φ) x 40 mm (L) Note1: All values specified are without connectors. Note2: Higher performance specifications are available upon request. Note3: Fiber type Corning SMF-28e. Note4: Over operating temperature, All SOP. A D Type: A: Add D: Drop 1 Channel Spacing 1: 100 GHz www.lighteltech.com 2210 Lind Ave SW, Suite 100 Renton, WA 98057 USA (425) 277-8000 ph. (425) 277-5280 Fax - 1st ITU Channel# e.g 23: 1558.98 nm - - Fiber Length Pigtail Style A: 1 meter (=Package style) B: 1.5 meter B: bare fiber S: Special L: 900 µm loose tube All rights Reserved 2009 Connector 0: None 1: FC/PC 2: FC/APC 3: SC/ PC 4: SC/APC 5: FC/SPC 6: SC/SPC 7: LC/UPC 8: LC/SPC 9: Special A: FC/UPC B: SC/UPC C: ST