Series 0517 Pin-Line Vertisocket w/Collet Contacts ™ ™ FEATURES • Mount components, jumpers, etc., at right angle to PC board • Available in 1 to 25 positions; cuttable to any number desired GENERAL SPECIFICATIONS • BODY MATERIAL: black UL 94V-0 glass-filled 4/6 Nylon • PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM B16/B16M-05 • PIN BODY PLATING: 200µ [5.08µ] 93/7 Sn/Pb per ASTM B545 –OR– 200µ [5.08µ] min. Sn per ASTM B545 Type 1 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290B • 4-FINGER COLLET CONTACT: BeCu per UNS C17200 ASTM B194-08 • CONTACT PLATING: 30µ [0.76µ] Au per MIL-G-45204 over 50µ [1.27µ] Ni per SAE AMS-QQ-N290B • CONTACT CURRENT RATING: 3 amps • OPERATING TEMPERATURE: 221°F [105°C] • INSERTION FORCE: 180g/pin, based on 0.018 [0.46] dia. test lead ORDERING INFORMATION • WITHDRAWAL FORCE: 90g/pin, based on 0.018 [0.46] dia. test lead XX-0517-90 C XX • NORMAL FORCE: 140g/pin, based on 0.018 [0.46] dia. test lead • ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] dia., 0.110-0.150 [2.79-3.81] long Optional Pin Body Plating TL = Sn/Pb MOUNTING CONSIDERATIONS Collet Contacts • SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ±0.05] dia. Display Angle Series No. of Pins (1 thru 25) ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR COLLET CONTACTS ON 0.200 [5.08] CENTERS, SEE DATA SHEET 13007 FOR BIFURCATED CONTACTS, SEE DATA SHEET 13006 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 13009 Rev. 6.1 1 of 1