High-Temp (250°C) Universal ZIF DIP Burn-in & Test Socket – (300°C Special Order) FEATURES • Accepts devices on 0.300 to 0.600 [7.62 to 15.24] centers • All pin counts go into PCB with either 0.300 or 0.600 [7.62 or 15.24] centers • Contacts normally-closed to eliminate dependence on plastic to sustain contact integrity • Socket handle configured with closed contacts (on) when in the UP or DOWN position, and mounted on the RIGHT or LEFT side of socket GENERAL SPECIFICATIONS • SOCKET BODY: black UL 94V-0 Polyphenylene Sulfide (PPS) • HANDLE: Stainless Steel • CONTACTS: BeNi 360, 1/2 hard • CONTACT PLATING: 50μ [1.27μ] min. NiB • CONTACT CURRENT RATING: 1 amp • OPERATING TEMPERATURES: -67°F to 482°F [-55°C to 250°C] • RETENTION FORCE (closed): 55g/pin based on a 0.020 [0.51] dia. test lead • INSULATION RESISTANCE: 1000 MΩ min. • DIELECTRIC WITHSTANDING VOLTAGE: 1000 VAC • LIFE CYCLE: 25,000 to 50,000 cycles • ACCEPTS LEADS: 0.014-0.045 [0.38-1.14] wide, 0.110-0.280 [2.79-7.11] long MOUNTING CONSIDERATIONS ORDERING INFORMATION XX-X55X-X X Plating 8 = NiB Termination 1 = Solder Pin Tail Handle Options 1 = Left up is closed 2 = Right up is closed 3 = Left down is closed 4 = Right down is closed (std) • See Socket Footprint below Row-to-Row Spacing (btm) 3 = 0.300 [7.62] 6 = 0.600 [15.24] No. of Pins 24, 28, 32, 36, 40, 42, 44, 48 ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED DO NOT USE THIS SOCKET IN A BURN-IN OVEN WITH CONTACTS IN OPEN POSITION, AS IT WILL DAMAGE THE SOCKET CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 10002HT Rev. 1.7 1 of 1