M1 THRU M7 SURFACE MOUNT GENERAL RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere FEATURES DO-214AC ◆The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ◆For surface mounted applications ◆Low reverse leakage ◆Built-in strain relief,ideal for automated placement ◆High forward surge current capability ◆High temperature soldering guaranteed: 250℃/10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-214AC molded plastic body Terminals: Solder plated, solderable per MIL-STD-750,Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.075 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ℃ ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Maximum repetitive peak reverse voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum average forward rectified current Peak forward surge current Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current TA=25℃ at rated DC blocking voltage TA=100℃ Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) Operating junction and storage temperature range SYMBOLS M1 M2 M3 M4 M5 M6 M7 UNITS VRRM VRMS VDC I(AV) IFSM VF 50 35 50 100 70 100 200 140 200 400 280 400 1.0 30.0 1.1 5.0 50.0 600 420 600 800 560 800 1000 700 1000 VOLTS IR CJ RqJA TJ,TSTG VOLTS VOLTS Amp Amps Volts μA 15.0 75.0 -55 to +125, -55 to +150 pF ℃/W ℃ Note: 1.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 2.P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 M1 THRU M7 RATINGS AND CHARACTERISTIC CURVES M1 THRU M7 Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2