KBL4005 THRU KBL410 Single Phase 4.0 AMPS. Silicon Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 4.0 Amperes Package: KBL FEATURES ◆Ideal for printed circuit board ◆Reliable low cost construction technique results in inexpensive product ◆High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ◆UL Recognized File number: E347214 MECHANICAL DATA ◆Case: Molded plastic ◆Lead: solder plated ◆Polarity: As marked MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20% KBL KBL KBL KBL SYMBOLS 4005 401 402 404 Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 KBL 406 KBL 408 KBL 410 UNITS 600 420 600 800 560 800 1000 700 1000 V V V 400 280 400 I(AV) 4.0 A IFSM 150 A VF 1.1 V IR 10 500 μA Operating Temperature Range RθJA RθJL TJ 19 2.4 -55 to +150 Storage Temperature Range TSTG -55 to +150 at T A=50℃ Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage at 4.0A Maximum DC Reverse Current @ TA=25℃ rated DC blocking voltage per leg T A=125℃ Typical Thermal Resistance (Note) ℃/W ℃ ℃ Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.with 0.47×0.47”(12×12mm) Copper Pads. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 KBL4005 THRU KBL410 RATING AND CHARACTERISTIC CURVES KBL4005 THRU KBL410 Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2