QKT – OSC7050 SMD OSCILLATOR PICTURE FEATURES CMOS compatible logic levels : Low power standby mode, Output Tri-state function Pin-compatible with standard 7.0×5.0mm packages: Embossed taping specification High precision characteristic covering up to high frequency range: Reflow soldering Low jitter and tight stability with fundamental or overtone Design Pb-free and RoHS/Green compliant SPECIFICATIONS Holder Type 7.0x5.0mm SMD OSCILLATOR Frequency Range 32.768KHz, 1.000 MHz to 150.000 MHz Frequency Stability ±20ppm to ±50ppm Supply Voltage 5.0V or 3.3V ±10％ ※(See Notes) Operating Temperature Range -20℃ - +70℃ / -40℃ - +85℃ Storage Temperature Range -40℃ - +85℃/-55℃ - +125℃ Symmetry（Duty Cycle） 40/60 Standard Output Load 15pF Hcmos Current Consumption（15pF only） 1.000Mhz - 35.999Mhz=25mA max (5.0V) 36.000Mhz - 69.999Mhz=60mA max 70.000Mhz - 150.000Mhz=80mA max Current Consumption（15pF only） 1.000Mhz - 35.999Mhz=20mA max ( 1.8V 2.5V 2.85V 3.3V) 36.000Mhz - 69.999Mhz=40mA max 70.000Mhz - 150.000Mhz=60mA max Rise/Fall Time 5 nS max ※Notes: The supply voltage 1.8V, 2.5V, 2.85V also can be made by customer. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 QKT – OSC7050 SMD OSCILLATOR MECHANICAL DIMENSIONS: Unit: mm For Fundamental For Third Overtone Suggested solder pad layout Note: Specification are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2