QKT – OSC5032 SMD OSCILLATOR PICTURE FEATURES Tight frequency tolerance: Reflow solder is possible Pin-compatible with standard 5.0×3.2mm packages Lower noise and current with reduced power consumption Low power standby mode: Built-in C-MOS IC with tri-state function Surface mounting and automatically loaded: Pb-free and RoHS/Green compliant SPECIFICATIONS Holder Type Frequency Range Frequency Stability Supply Voltage Operating Temperature Range Storage Temperature Range Symmetry（Duty Cycle） Output Load Current Consumption（15pF only） (5.0V) Current Consumption（15pF only） ( 1.8V 2.5V 2.85V 3.3V) Rise/Fall Time 5.0x3.2mm SMD OSCILLATOR 32.768KHz, 1.000 MH to 125.000 MHz ±20ppm to ±50ppm 5.0V or 3.3V ±10％※(See Notes) -10℃ - +60℃ to -40℃ - +85℃ -40℃ - +85℃/-55℃ - +125℃ 40/60 Standard 10 TTL or 15pF Hcmos 1.000Mhz - 35.999Mhz=25mA max 36.000Mhz - 69.999Mhz=60mA max 70.000Mhz - 100.000Mhz=80mA max 1.000Mhz - 35.999Mhz=20mA max 36.000Mhz - 69.999Mhz=40mA max 70.000Mhz - 125.000Mhz=60mA max 5 nS max ※Notes: The supply voltage 1.8V, 2.5V, 2.85V also can be made by customer. MECHANICAL DIMENSIONS: Unit: mm Suggested solder pad layout Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1