Kingtronics® Kt® D2UB05 THRU D2UB100

D2UB05 THRU
D2UB100
Single Phase 2.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts Current 2.0 Amperes
FEATURES
Package: D3K
◆Ideal for printed circuit boards
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
260℃/10 seconds
◆UL Recognized File number: E347214
MECHANICAL DATA
◆Case: Molded plastic
◆Lead: solder plated
◆Polarity: As marked on body
◆Mounting Torque: 0.8N·m
◆Recommended Torque: 0.5N·m
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
D2UB
D2UB
D2UB
D2UB
D2UB
D2UB
D2UB
05
10
20
40
60
80
100
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
V
VDC
50
100
200
400
600
800
1000
V
Maximum DC blocking Voltage
Maximum Average Forward
T C= 100℃
Rectified Current at
T A= 40℃
(1)
IF(AV)
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load (JEDEC method)
Maximum Instantaneous Forward Voltage @ 2A
2.0
A
1.0(2)
IFSM
35
VF
1.1
A
V
Rating for fusing (3ms≤t<8.3ms) Tj=25℃
2
It
3.5
A sec
Maximum DC Reverse Current @ T A=25℃
IR
5.0
μA
RθJA
40
RθJC
3.5
TJ
-55 to +150
℃
TSTG
-55 to +150
℃
Typical Thermal Resistance (Note)
Operating Temperature Range
Storage Temperature Range
2
℃/W
NOTE:1. Unit case mounted on 1.6*1.6*0.06” thick (5.1*5.1*0.15cm) Al.Plate
2. Unit mounted on P.C.B. with 0.5*0.5” (12.7*1.27mm) copper pads and 0.375” (9.5mm) lead length
Website: www.kingtronics.com
Email: [email protected]
Tel: (852) 8106 7033
Fax: (852) 8106 7099
1
D2UB05 THRU
D2UB100
RATING AND CHARACTERISTIC CURVES D2UB05 THRU D2UB100
FIG. 1-MAXIMUM NONO-REPETITIVE FORWARD SURGE CURRENT
FIG. 2-MAXIMUM FORWARD CURRENT DERATING CURVE
PER BRIDGE ELELMENT
AMBIENT TEMPERATURE.(℃)
NUMBER OF CYCLES AT 60Hz
FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
FIG. 4-TYPICAL REVERSE CHARACTERISTICS PER BRIDGE
ELEMENT
PER BRIDGE ELEMENT
INSTANTANEOUS FORWARD VOLTAGE.(V)
PERCENT OF RATED PEAK REVERSE VOLTAGE.(%)
Note: Specifications are subject to change without notice.
Website: www.kingtronics.com
Email: [email protected]
Tel: (852) 8106 7033
Fax: (852) 8106 7099
2