H HiTRON UNIVERSAL INPUT AC-DC INTERNAL OPEN FRAME SWITCHING POWER SUPPLIES 19-25 WATTS SINGLE, DUAL & TRIPLE OUTPUT HVI19 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC INPUT COMPACT OPEN FRAME FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Range typical 90-264Vac. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connecter: Molex 5273 or 41671 or equivalent. Output Wattage: PCB 19 watts, L-Bracket 25 watts. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1-2% Aux. VO2 typ. ± 3-5% (stacked on). Aux. VO3 typ. ±2-3% (P.R.). Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at Main VO1. Adjustability: Available at Main VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. Rating 100 to 240Vac. Input Connector: Molex 5273(vertical) or equivalent. Input Frequency: 47-63Hz. Inrush Current: Typical 20A at 230Vac. Input Current: Typical 0.70A at 115Vac, 0.3A at 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typical 40mS at 115Vac, Typical 150mS at 230Vac. Leakage Current: Less than 0.3mA at 230Vac. GENERAL SPECIFICATION Efficiency: Typical 70%. (various with output voltage) Switching Frequency: 40KHz. Circuit Topology: Free-running Flyback circuit. Transient Response: Output voltage returns in less than 3ms following a 25% load change. Power Density: 1.15-1.67 Watts /Cubic Inch. Operating Temperature: 0 to +50 °C. Storage Temperature: -20 to +85 °C. Temperature Coefficient: Typical 0.04% / °C. Cooling: Free air convection cooling. Safety Standard: Meet UL 60950-1/EN 60950-1 Class I. Construction: PCB or L-Bracket format. NOTE: (1)All measurement are at nominal input, full load and +25°C unless otherwise specifications. (2)Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory. -55- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. HVI19-10 HVI19-10(L-B) HVI19-11 HVI19-11(L-B) HVI19-12 HVI19-12(L-B) HVI19-13 HVI19-13(L-B) MAIN VO1 @ Typ. Volt. Max. 4.0A 5.0A 5V 5.0A 4.6A 5V 1.5A 1.5A 12V 2.5A 2.0A 12V 1.3A 1.2A 15V 1.7A 1.6A 15V 0.8A 1.0A 24V 1.2A 1.0A 24V DUAL OUTPUT HVI19-20 HVI19-20(L-B) HVI19-21 HVI19-21(L-B) HVI19-22 HVI19-22(L-B) HVI19-23 HVI19-23(L-B) MAIN VO1 @ Typ. Volt. Max. 3.0A 4.0A +5V 4.0A 5.0A +5V 2.6A 3.0A +5V 4.0A 5.0A +5V 2.6A 3.0A +5V 4.0A 5.0A +5V 2.6A 3.0A +5V 4.0A 5.0A +5V AUX. VO2 † Typ. Volt. Max. 0.5A +12V 1.0A 0.5A +12V 1.0A 0.5A +12V 1.0A 0.7A +12V 1.5A 0.3A +24V 0.5A 0.3A +24V 0.5A 0.3A +15V 0.6A 0.4A +15V 0.8A AUX. VO3 Typ. Volt. Max. 0.2A 0.5A -12V 0.4A 0.8A -12V 0.2A 0.5A -5V 0.3A 0.6A -5V 0.2A 0.5A -12V 0.3A 0.6A -12V 0.2A 0.5A -15V 0.3A 0.6A -15V MODEL NO. AUX. +VO2 †or -VO3 Typ. Max. Volt. 1.0A 0.20A -5V 1.0A 0.50A -5V 1.0A 0.50A ±12V 1.0A 0.50A ±12V 0.8A 0.40A ±15V 0.8A 0.40A ±15V 0.5A 0.25A +24V 0.5A 0.25A +24V TRIPLE OUTPUT MODEL NO. HVI19-30 HVI19-30(L-B) HVI19-31 HVI19-31(L-B) HVI19-32 HVI19-32(L-B) HVI19-33 HVI19-33(L-B) MAIN VO1 @ Typ. Volt. Max. 2.2A 3.0A +5V 4.0A 3.0A +5V 3.0A 2.0A +5V 4.0A 3.0A +5V 3.0A 2.0A +5V 4.0A 3.0A +5V 3.0A 2.0A +5V 4.0A 3.0A +5V Symbol: "" OVP built-in. "@" Adjustable. "†" Stacked on main O/P. "" Installed with Post Regulator (P.R.). Remark: (1) At least 20% of typical main output current is required to maintain stated regulation. (2) Max. current can't be drawn from all output at the same time. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: PCB 148.0g(5.2 Oz.) L-B 223.0g(7.9 Oz.) PCB FORMAT L-B FORMAT INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT SINGLE ASSIGNMENT AC-L AC-N AC-G VO1 DC COM P1-L P1-N P1-G P2-3,4 P2-1,2 CONNECTOR or PIN# Mating connector: P1 Molex 5195 or 5239 series. P2 Molex 5195, 5239 or 3069 series. -56- VO1 P2-2 SINGLE/DUAL/TRIPLE OUTPUT VO2 VO3 DC COM P2-3 P2-4 P2-1