H HiTRON UNIVERSAL INPUT AC-DC EXTERNAL DESKTOP SWITCHING ADAPTER 60-75 WATTS GREEN POWER SINGLE OUTPUT HEG75 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC INPUT DESKTOP IEC320-C6/C8 AC INLET MEET UNIVERSAL SAFETY STANDARDS NO LOAD POWER CONSUMPTION < 0.5W EMI MEET CISPR EN 55022/ FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Typical 90-264Vac. Input Connector: 3 pole AC inlet IEC320-C14(DT7) / 2 pole AC inlet IEC320-C8(DT8). Input Frequency: 47-63Hz. Inrush Current: Typical 9.9Arms at 230Vac. Input Current: Typical 1.23A at 115Vac, 0.67A at 230Vac. Dielectric Withstand: Meet IEC60950-1. EMI: Meet CISPR EN55022 / FCC Class B. Hold-up Time: Typical 16.8mS at 115Vac, Typical 84.8mS at 230Vac. Over Temp. Protection: Factory set. Leakage Current: Less than 0.5mA. LED Indicator: Optional. No Load Power: Less than 0.5W at 230Vac. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typical 60-75 Watts. Output Connector: Optional. Line Regulation: Typical 0.1%. Load Regulation: Typical ±5.0%. Noise & Ripple: Typical 2% peak to peak. OVP: Built-in by latch circuit. Adjustability: Factory set. Over Current Protection (OCP): Fully protected against output overload and short circuit. OCP is installed PCT (Peak Current Timer) for large peak current. The PSU will shutdown after OCP is activated in a certain period. The PSU will hiccup if the output is in short circuit. Consult the factory for OCP setting. GENERAL SPECIFICATION Efficiency: Typical 85-89%.(various with output voltage) Switching Frequency: Typical 60KHz. Circuit Topology: Fixed Frequency flyback circuit. Transient Response: Output voltage returns in less than 2mS following a 25% load change. Safety Standard: Meet EN60950-1/ UL60950-1, Class I for DT7L and Class II for DT8. Operating Temp.: 0 to +40 °C. Storage Temperature: -20 to +85 °C. Cooling: Free air convection. Construction: Impact resistant thermo-plastic enclosure case. Power Density: 5.15-6.5Watts. / Cubic Inch. Desktop Format. Note: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified. (2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load varied from half load to full load (%). (3) The exact obtainable load regulation depends upon the output cord selected and load current. (4) The typical cord is UL1185 AWG#18 or UL1571 16AWG#. The typical cord length for UL1185/AWG#18 is 2ft and for UL1571 16AWG# is 1M. (5) The DC COM of output is connected with GND. (6) Due to requests in market and advances in technology, specifications subject to change without notice. For the details of safety approval, please consult the factory. -23- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. AC INLET O/P VOLTAGE O/P CURRENT HEG75-S120500-7L IEC320-C6(DT7L) 12.0Vdc 5.00A HEG75-S120500-8 IEC320-C8(DT8) 12.0Vdc 5.00A HEG75-S120550-7L IEC320-C6(DT7L) 12.0Vdc 5.50A HEG75-S120550-8 IEC320-C8(DT8) 12.0Vdc 5.50A HEG75-S190390-7L IEC320-C6(DT7L) 19.0Vdc 3.90A HEG75-S190390-8 IEC320-C8(DT8) 19.0Vdc 3.90A HEG75-S240250-7L IEC320-C6(DT7L) 24.0Vdc 2.50A HEG75-S240250-8 IEC320-C8(DT8) 24.0Vdc 2.50A HEG75-S240320-7L IEC320-C6(DT7L) 24.0Vdc 3.20A HEG75-S240320-8 IEC320-C8(DT8) 24.0Vdc 3.20A HEG75-S300200-7L IEC320-C6(DT7L) 30.0Vdc 2.00A HEG75-S300200-8 IEC320-C8(DT8) 30.0Vdc 2.00A HEG75-S300250-7L IEC320-C6(DT7L) 30.0Vdc 2.50A HEG75-S300250-8 IEC320-C8(DT8) 30.0Vdc 2.50A HEG75-S360210-7L IEC320-C6(DT7L) 36.0Vdc 2.10A HEG75-S360210-8 IEC320-C8(DT8) 36.0Vdc 2.10A HEG75-S480156-7L IEC320-C6(DT7L) 48.0Vdc 1.56A HEG75-S480156-8 IEC320-C8(DT8) 48.0Vdc 1.56A MECHANICAL DIMENSIONS: MM [INCHES] -24- WEIGHT: 324.0g (11.5 Oz.)