- HiTRON Electronics Corporation

H HiTRON
UNIVERSAL AC INPUT HARMONIC CORRECTION
AC-DC INDUSTRIAL DIN-RAIL SINGLE OUTPUT 120 WATTS
SWITCHING MODE POWER SUPPLIES HPD125 SERIES
FEATURES:
 ACCOMMODATE UNIVERSAL AC INPUT
 MEET IEC 61000-3-2 HARMONIC
CORRECTION
 MEET UNIVERSAL SAFETY STANDARDS
AND INDUSTRIAL UL 508
 INDUSTRIAL POWER SUPPLIES FOR
SNAP-ON MOUNTING ON DIN-RAILS
 EMI MEET EN 55022 CLASS B
 CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Voltage: Typ. 90-264Vac with PFC.
Output Voltage: See Ratings Charts.
Output Current: See Ratings Charts.
Output Wattage: Typ. 120W continuous.
Output Connector: M-T plug connector.
Line Regulation: Typ. 0.1%.
Load Regulation: Typ. ± 0.5-1.0%
Noise & Ripple: Typ. 1% peak to peak.
OVP: Built-in.
Adjustment: Available.
LED Indicator: Installed.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
Typically set at 130% max. load.
Consult the factory for special OLP setting.
Input Connector: M-T plug connector.
Input Frequency: 47-63Hz.
Inrush Current: Typ. 26A @ 230Vac.
Input Current: 1.35A @ 115Vac, 0.9A @ 230Vac.
Dielectric Withstand: Meet IEC 60950-1.
EMI: Meet EN 55022 & FCC Class B.
Power Factor Correction: Meet Harmonic Correction
per IEC 61000-3-2.PF typ.0.96-0.98.
No Load Operation: No damage.
Hold-up Time: Typ. 60mS @ 115Vac, 80mS @ 230Vac.
Earth Leakage: Less than 0.60mA @ 230VAC.
GENERAL SPECIFICATION
Efficiency: Typ. 78%.
Switching Frequency: Fixed frequency 72KHz.
Circuit Topology: Fixed freq. forward circuit.
Transient Response: Peak transient 68mV and recovers
within 20mS after 25% load change.
Safety Standard: IEC 60950-1/UL 60950-1 Class I.
Power Density: 2.10Watts /Cubic Inch.
Industrial Grade UL 508.
Operating Temperature: -10 to +70°C. Derating from
+60 to +70°C by derating 2%/°C.
Storage Temperature: -25 to +100°C.
Temperature Coefficient: Typ. 0.03% /°C.
Cooling: Free air convection cooling for Ta < +60°C.
Moving air is request for Ta >+ 60°C full load operation.
Construction format: Enclosure metal box with
DIN-clips format.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
Hitron Electronics Cororation. B4-11, P.O. Box 26-110 Kaohsiung Export Processing Zone Kaohsiung 806 Taiwan
TEL: 886-7-8210410/FAX: 886-7-8419917, 886-7-8210511/E-mail: [email protected] /Web-site: www.hitron-e.com
1
Sep. 27, 2004
OUTPUT VOLTAGE / CURRENT RATINGS CHART
SINGLE OUTPUT
MAIN VO1 @★
MODEL NO.
Typ.
Volt.
Peak
HPD125-S120100
10.0A
12.0V
12.0A
HPD125-S240050
5.0A
24.0V
6.0A
HPD125-S480025
2.5A
48.0V
3.0A
Symbol: "★" OVP built-in.. "@" Adjustable.
Remark: Peak load less than 60sec. with duty cycle <10%.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 850.0g(29.98 Oz.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
ASSIGNMENT
CNTR & PIN #
AC-L
P1-3(L)
AC INPUT
AC-N
AC-G
P1-2(N)
P1-1(G)
SINGLE OUTPUT
VO1
DC-COM
P2-3,4
P2-1,2
Hitron Electronics Cororation. B4-11, P.O. Box 26-110 Kaohsiung Export Processing Zone Kaohsiung 806 Taiwan
TEL: 886-7-8210410/FAX: 886-7-8419917, 886-7-8210511/E-mail: [email protected] /Web-site: www.hitron-e.com
2
Sep. 27, 2004